Accueil > Vaporizers' accessories > Accessory packs and sets > WHip EZ Change hands free for Vaporbrothers

WHip EZ Change hands free for Vaporbrothers

VABR_whipEZglass

Easy-to-remove suction hose and glass for your The Original electric vaporizer from VaporBrothers.

More details

The hands-free glass EZ change tube is made of 16 mm ground glass and is threaded onto the heating tip. You can remove the wand between draws to keep it cooler and check your herbs easily between draws. The ground glass tip does not fit well with the "Standard" model vaporizers. (It can, however, be used in a pinch).

  • The 16 mm ground-glass cone allows this whip to be connected to hands-free vaporizers.
  • All features are well blended, with no sharp edges or weak points.
  • The silicone hose is medical-grade.
  • Compatible with all Hands-Free vaporizers VaporBrothers.

Vaporizer kit contents VaporBrothers:

  • Medical-grade silicone tubing
  • Ceramic mouthpiece
  • Transfer wand with grids

Cleaning advice - Boiling water:

For brave and conscientious users only!

Pour boiling water into a small saucepan. Leave the wand fully assembled. Dip the bowl end of the wand into the boiling water and suck the water into the wand, inhaling slowly through the tube. Do not scald yourself with the hot water. Residues should come off when you vigorously blow the water out of the wand. Vaporization residues should not stick to the glass as much as smoke residues. If there are burn marks, try scraping them off with a tool. The pan may become difficult to clean with washing-up liquid, so try this trick: heat some cooking oil, leave for a few minutes, then wash as normal with dishwashing detergent.


Cleaning tip - Soak in alcohol:

Fill a plastic bag about a quarter full with rubbing alcohol (isopropyl alcohol and a little water) and a spoonful of salt. Leave the grid in the wand handpiece. Remove the glass parts and place them in the bag. Shake the bag to cover the glass with alcohol and let it stand for a few minutes. Rinse with hot water. If necessary, repeat the process once or twice, or leave overnight. Rinsing should remove all residues, but will leave a film of oil on the outside of the glass. Use an alcohol-soaked cloth to clean the outside of the glass.

Resetting the grille:

For best performance, use only Vaporbrothers 0.750" (19mm) replacement grids.



About glass

At Vaporbrothers, glass is made from laboratory-grade borosilicate glass and meets high standards for materials and workmanship. All units are manufactured to a uniform thickness, and we inspect them under polarized light to ensure there are no imperfections or microfractures.

About our ceramics

Ceramic is an extremely dense alternative to glass, and about 5 times stronger. Choose the ceramic option if you're in a place where glass can easily shatter (do you have a glass table or a concrete floor?).

About our choice to use a custom-sized tip:

We decided to use this 16 mm size because it's simply better, both in terms of superior vaping experience and because it's more efficient in consuming herbs. Since then, counterfeits and Whip-based competitors have taken a shortcut and used a standard size (19 mm) which is easier to break, consumes more herb and is more likely to spill.

27 other products in the same category: