Quartz Quest 510

The Quartz Quest from Divine Tribe is a clearomizer designed on the concept of quartz bangerz with carb cap.

Works with temperature control mode.

• No screw 510.
• Fully rebuildable.
• Eco-Friendly design.

Use with caution.

As a general rule it is recommended to set the mod to:

• Wattage 40-55w
• TCR Value of 280 on 49w to get 260°C.

A lower temperature gives better flavors and smaller clouds.

By cleaning it after each use with a cotton bud (wooden body) or a piece of paper this clearomizer guarantees one of the best flavors available on the market.

Quartz Quest Mod Specification

To use the Quartz Quest here are some instructions to respect in order not to overheat your clearomizer.

• Eleaf pico TCR -

300 using 50w to get to 500°f (pulse button after initial 10 seconds throughout the session)

• Paranormal 166 -

tcr .00240

• (ArcticFox on Pico)

Big hits: TCR 300 / 50w / 500 degrees F / resistance locked at .24 ohms

• (ArcticFox on Pico)

Low and slow (more accurate temperature, but longer heat-ups and more firing to keep bucket at temp): TCR 225 / 45w / 520 degrees F / resistance locked at .24 ohms

• (VooPoo GENE)

Big hits: TCR 4913 / 55w / 500 degrees F / resistance .26 ohms

• LostVape Therion dna75c :

50 watts, r locked at room temp (0.238 for mine), Replay mode.
Fire it til the load boils + 1 to 2 seconds. Let off. "Save Puff". Subsequently (for fresh and partial loads, both) , just lay on the button til a few seconds before you're 'full'.
Works better, than any combination of settings tried.

• Cuboid 200 & Vtc mini (both joyetech)

TCR 400, 60 W, 425°F, .25Ω
Requires pre-heat Imo. Excellent flavor

• Pico E-Leaf with Arctic Fox installed.

TCR 225, resistance locked at 0.25, 414 F temp, 55 watts.
Requires 10 - 15 seconds of warmup but then it hits like a champ for 4-5 puffs.

• Voopoo drag

Tcr 4913, 50w, 450, .24 resistance
It's weird - the heaters are made of tungsten (typically TCR 450 or 4500 on GENE) but with the conversion chart it brings it to 4913. Even though the heater TCR is accurate, the heat value itself isn't. TCR 2350/2400 is more accurate heat value-wise, but I 'm still liking the 4913 performance way more.

• Rx2 21700

TCR: 235 40w-45w 510°F-540°F

Video presentation of the clearomizer Quartz Quest of Divine Tribe: