Le Sceptre d'Ino - blue glass stem for Dynavap

The Sceptre portable vaporizer comes with:

Teh B stainless steel tip and Dynavap cap - made in the USA.

A thick, solid 1mm glass tube - made in China

Very easy to use, the scepter will follow you wherever you go. It's sturdy and easy to wash with a little 99.9% ISO alcohol, available here.

Glass provides one of the best flavor renditions available on the market, as it's a neutral-tasting material.
The small glass spikes in the sceptre's tube effectively cool the vapor, lengthening its path before reaching your throat.

Buy a blue Sceptre d'Ino vaporizer and receive:

• An 8cm long Sceptre d'Ino glass tube - color blue
• A Dynavap cap.
• A stainless steel The B Dynavap tip.
• 3 pipe cleaners.
• A Dynavap XL storage tube to store your hot sceptre if necessary.

Technical specifications of the Sceptre vaporizer Orion:

• Borosilicate glass
• Very small = 110 mm
• Lightweight = 40 grams
• Heats up in seconds (3 to 5 seconds) with a storm lighter
• Can be heated with any heat source (candle, ember, light bulb, etc.)
• Excellent aroma thanks to glass body.
• Efficiently cooled vapor thanks to 7 spikes in the glass that lengthen the passage of vapor.
• Total length of steam cooling 10.7 cm instead of the 8cm length of the scepter's glass body.
• More or less variable temperature, depending on the position of the flame during heating.

How to use the Sceptre vaporizer :

First of all, we advise you to practice with an empty vaporizer

• Remove the small metal cap from the Sceptre.
• Fill the Sceptre's stainless steel bowl (not the cap) with dry, crumbled plants or resin
• Close the Sceptre cap
• Heat the Sceptre on the side of the metal cap, while turning, until you hear a click

CAUTION: DO NOT HEAT FROM THE END!

Only heat the sides of the cap (see video below)

• After the click, stop heating and inhale.
• If you continue to heat after the 1st click, a second click will be heard, indicating that you absolutely must stop heating, as otherwise combustion will take place, and this overheating tends to damage the cap.
• Before restarting heating:
• Wait for a 3rd click (or 30 seconds if you didn't hear anything) to let it cool down.
• You can then start heating again until your bowl is completely vaporized.
• You can then repeat the procedure and heat until you hear a click, and so on until your bowl is fully vaporized (dark brown plants and no more steam).
• Filling and emptying the bowl of your "M" 2019 is a simple matter of suction and blowing.

Be careful not to burn yourself, so remember to let your "M" 2019 cool down before putting your fingers in it.

How do I clean the Sceptre vaporizer Orion?

Cleaning this portable vaporizer is quick and easy. Here's the procedure we recommend

• Disassemble your Sceptre vaporizer completely.
• Soak all parts in boiling water for 1 minute
• Take them out, wipe them dry and soak them in a ziplock bag containing 99.9% ISO alcohol for 2 minutes, then shake a little.
• Take them out, rinse with clean water, then soak in boiling water containing a little cleaner such as Limpuro (or similar) for 5 minutes.
• Rinse with clean water.

Voila, your Sceptre vaporizer is brand new, odorless and ready to follow you wherever you want to take it.