New products
-
Arizer Gong Joint 10 / 14 / 18 mm
Gong joint portable vaporizer Arizer Solo or Arizer Air (all models),...
-
Palmer Anlerr
The Palmer from Anlerr is an entry-level vaporizer offering a simple...
-
Pivot Puffco
The latest innovation from Puffco, the Pivot is a new portable vaporizer...
Catalog
Spare parts There are 111 products.
Titanium Tip: Halo
The Halo is an official titanium tip from Dynavap (USA) released in October 2024.The fact that it's made of titanium means it heats up and cools down more quickly, enabling fast, even extraction with excellent flavor rendition.The 9 fins on the bottom of the tip limit heat transfer to the stem and ensure optimum vapor cooling, for greater comfort of...
Hyper Cap & tip kit
Package including the Titanium Tip:Hyper (bowl) and HyperCap (cap) for Dynavap 's HyperDyn portable vaporizer at a special price.
Hyper Cap
DynaVap's Hyper Cap is the cap for the HyperDyn portable vaporizer, and is designed specifically to fit the Titanium Tip: Hyper, offering a new vaping experience with this advanced combination.
Tip Titanium: Hyper
DynaVap's titanium Hyper Tip is the bowl of the HyperDyn portable vaporizer and is specially designed to fit the Hyper Cap
Rubilyzer 14 mm microdose dispenser bowl
The Microdose diffuser bowl for Rubilyzer vaporizers from Katalyzer offers a vaporization experience optimized for microdosing, combining convection and conduction for maximum efficiency. We recommend setting your Rubilyzer lower than with a standard heater: start low and gradually work your way up until you're completely satisfied.
Rubilyzer 18 mm microdose dispenser bowl
The Microdose diffuser bowl for Rubilyzer vaporizers from Katalyzer offers an optimized microdosing vaporization experience, combining convection and conduction for maximum efficiency. We recommend that you set your Rubilyzer lower than with a standard heater: start low and work your way up until you're completely satisfied.
Tip and Quartz Cap Vaphit X
Capdu Vaphit X stainless steel and quartz tip from Vaphit. The latest version of the manufacturer's quartz tip and cap, with a thicker cap than the QHC for better heat retention and a tip with greater capacity and 6 holes for enhanced convection. Ideal for use on a Vaphit stem, a Dynavap stem or any other Dynavap-compatible stem.The quartz cap features...
Tip and Quartz Cap QHC Vaphit
Stainless steel and Quartz Cap tip from QHC by Vaphit. Ideal for use on a Vaphit stem, a Dynavap stem or any other Dynavap-compatible stem.The Quartz Cap features 1mm or 1.5mm air holes for convection, depending on the option chosen.
Vaphit Quartz Cap v2
Official quartz heating cap for vaporizers Vaphit. Small side holes allow convection once the cap is heated. The cap is available with two different hole diameters to allow more or less air to enter during inhalation. This version is thicker than the previous one (1.5 mm vs. 1 mm), which allows better heat retention and makes the cap a little more solid.
Vaphit Quartz Cap
Official quartz heating cap for Vaphit QHC vaporizers. Small side holes allow convection once the cap is heated. The cap is available with two different hole diameters to allow more or less air to enter during inhalation.This cap is also available in a slightly thicker version, which retains heat better and is also a little more solid:Vaphit Quartz Cap V2
Dynavap adapter for Wand
This official adapter adapts all Dynavap vaporizers to the Wand, making it quick and easy to heat them hands-free.
Titanium tip: Helix
Dynavap presents its latest innovation, the Helix titanium tip. With its refined helix design, the Helix is the lightest Dynavap tip to date (3 grams) and its design limits heat transfer with the stem. Its thicker rims and three convection ports facilitate more even vaporization by limiting hot spots.
Vestratto Universal Stem Adapter
The Vestratto Universal Stem Adapter (USA) allows you to adapt your CopperCore bowl from Anvil Vestratto to most stems on the market. Perfect to let your imagination run wild and allow maximum customization.
Anvil XL Bowl
Official replacement bowl for Anvil Vestratto mechanical portable vaporizer. Size XL with a capacity of 0,2 grams. ℹ️ Also available in Half bowl version (0,05 grams, perfect for microdosing)
Armored Cap - Dynavap
The Armored Cap is a much thicker cap than the original one sold with your vaporizer Dynavap.Its big advantage is that it allows to make only one heating to extract all the active ingredients of your herbs. It delivers thicker inhalations, saves on lighter gas and also produces a slightly hot and dense vapor.
Vaphit silver ring for Dynavap caps
Silver collar for Dynavap captive caps. This simple, elegant accessory, made from 99.99% pure silver, provides more even heating over time, without the need to rotate the Dynavap. The result is very even heating, allowing several taffes to be fired in a row without the need to reheat.
Volcano filling chamber housing
An official replacement housing for Volcano filling chamber. Includes the upper and lower part of the housing, but does not include the filling chamber(Volcano Hybrid and Easy Valve). Also available as a pack with the latter.
Fireplace with Ø 14 mm glass grate and...
All-glass firebox, including grate, to guarantee the most authentic flavors possible. Features a small right-hand side handle for easy handling, even after heating. Compatible with Ø 14 mm water filters
Plenty cooling spiral
The official accessory of the Plenty vaporizer, this cooling spiral is the pipe that refreshes the steam coming from the Plenty vaporizer by Storz & Bickel.
Steel Chill Pipe Dynavap
A water pipe designed for Dynavap, designed to hold ice cubes and keep them for up to 12 hours thanks to its thermos-like design. On these sadly hot days, this bong could prove to be a lifesaver to refresh your Dynavap sessions! This model is in black finish. ℹ️ 16/06/2022: pre-orders open, delivery expected within three weeks 24 € discount with the code...
Spacers Katalyzer for Mighty and Crafty
Contains 2 glass spacers designed by Katalyzer for Mighty+ and Crafty+ portable vaporizers (as well as Mighty and Crafty).
Revolve glass body (MAD Heaters)
A quartz body with official air intake for stem Revolve from MAD Heaters. The choice of glass ensures the most neutral flavor rendition possible.
-
Plenty Vaporization Unit
An official vaping unit for the Plenty vaporizer from Storz & Bickel and its set of wearing parts. A great way to start out almost new!
Iamos stem Orion - 8 cm - purple glass...
Tube de Iamos transparent purple stem from Orion in thick borosilicate glass compatible with all Dynavap tips. Turn your favorite portable vaporizer into a god. Meet the whole Tubes d'Orion Pantheon : in transparent (Héméria), smoked black (Typhée) blue (Ino), pink (Vénus), green (Alania) or in orange (Hestia).
Flame intake courbé long (90 mm?) pour Tetra
A spare part for your DynaBox Tetra vaporizer, this curved and long (7 cm) flame intake is the glass piece that allows the flame to spread its heat. The thickness of the glass gives it a certain solidity Sold by unit.
Flame intake droit long (90 mm?) pour Tetra
A spare part for your DynaBox Tetra vaporizer, this straight and long (7 cm) flame intake is the glass piece that allows the flame to spread its heat. The thickness of the glass gives it a certain solidity and the small indentation in the tube allows to restrict the amount of incoming heat to avoid combustion. Sold by unit.
Flame intake courbé court (50 mm) pour Tetra
A spare part for your DynaBox Tetra vaporizer, this short (5 cm) curved flame intake is the glass piece that allows the flame to spread its heat. The thickness of the glass gives it a certain solidity and the small indentation in the tube allows to restrict the amount of incoming heat to avoid combustion. Sold by unit.
Embout de chauffe droit court pour Tetra
A spare part for your DynaBox Tetra vaporizer, this short (5 cm) straight flame intake is the glass piece that allows the flame to spread its heat. The thickness of the glass gives it a certain solidity and the small indentation in the tube allows to restrict the amount of incoming heat to avoid combustion. Sold by unit.
Cup DynaVap pour Wand Ispire
Heating a Dynavap with a Wand is not very complex, but you have to be careful to position your cap correctly for an even, regular and efficient heating. This glass bowl Katalyzer makes the task much easier, as well as allowing you to leave your Dynavap vaporizer a few seconds longer after the click to obtain a greater density of vapor.
Titanium Heating Component for Tetra
Alternative titanium heating element for Tetra vaporizers from DynaBox. This official product replaces the original glass air inlet tube and gives your brick - besides a more compact size -a different type of heating.
Chamber Lock Ring for Fenix 2.0
Official replacement ring to lock the chamber of your Fenix 2.0.
Filling pads for dosing capsules Storz &...
Contains 4 capsule filling pads Storz & Bickel.
Chambre de remplissage pour Volcano Hybrid
New filling chamber (February 2022) with ceramic coating for Volcano Hybrid .
Perforated Cap - Cap perforé
The perforated Cap of Dynavap fits on all the vaporizers vapcap of the brand. Equipped with microscopic holes it allows an entry of more air which will have the effect of extracting the flavors more gently so to make them last as well as to give more air puffs. Victim of its success, return around January 23, 2022.
Balloon connector Arizer
A quick and easy way to replace your balloons for Arizer Extreme Q and XQ2, at the size of your choice. Official accessory, identical to the original one.
Air filters for Arizer XQ2
Contains 4 air filter foams for Arizer XQ2.
Cartouche de filtration + filtres Arizer XQ2
Air filter cartridge and foam for Arizer XQ2. Official product, it will perfectly replace your original air filter once it has been used up, or if you misplace the first one. This is one of the nice innovations brought by the Arizer XQ2 compared to the Extreme Q, allowing a filtration of the air entering the device.
V.A.P. ceramic filter (airpath)
This airpath ceramic filter made from zirconium is identical to the original included in the V.A.P. (Vaporisateur pour Amateur de Plantes, Vaporizer for Plant Lovers aka Xmax V3 Pro for french talking countries).
Battery cover for V.A.P.
Replacement battery cover for your Vaporizer for Plant Lovers (V.A.P. aka Xmax V3 Pro for the French market). Identical to the original one, designed in metal and held by two strong magnets.
Simrell Performance Kit
The Simrell Performance Kit allows you to add an Intercooler to your Dynavap M, Vong or other 62mm straight Stem
Simrell Master Key
Made of antimicrobial brass, the Master Key was designed as a multi-function tool. On one side, you have a rod that allows you to remove an intercooler from a stem with Vortex, on the other side, the concave surface allows you to adjust your Dynavap grills.
Springs for VapMan
Replacement springs for the portable vaporizer VapMan Classic or Basic.
2nd Generation OMNI XL Condenser Assembly...
The second edition of the XL condenser in Titanium Dynavap with adjustable airflow
Titanium Tip - Dynavap - accessoire...
The Dynavap titaniul tip is the bowl of many portable vaporizer at Dynavap Entirely made of titanium and supplied with a pre-installed screen
Titanium Tip - Dynavap - accessoire...
The Dynavap titaniul tip is the bowl of many portable vaporizer at Dynavap Entirely made of titanium and supplied with a pre-installed screen
Stainless Steel Tip 2021
The 2021 version of Dynavap's Stainless Steel Tip, the VapCap M bowl version 2021, is a new addition.Made entirely of stainless steel, and supplied with a pre-installed grid.
Pusher grille for PAX
An accessory for PAX portable vaporizers, the pusher is a 3D grid designed to screw onto a vented oven lid or non-vented oven lid 2.0. It adjusts the size of the bowl and improves vaporization to deliver bigger puffs.Turn your PAX into a real competitor to Mighty, Crafty, Focus etc.
Glass Lining TinyMight
Replacement part for your TinyMight vaporizer.May be necessary if you broke this part.
Spikey Vapcap - Glass Charlie - Stem Dynavap
The Bubble stem is made by Katalyzer, compatible with Dynavap tips, so you can have a portable vaporizer with a 100% glass airpath. Three different sizes available. Currentely avalaible size: 6, 8 and 11 cm.
DotLeaf 1.5 Replacement Chamber
This filling and heating chamber for DotLeaf & DotLeaf 1.5 is identical to the original one. Made of PBT, it is comparable to a pod and works with dry plants and resins. Replacement pod/chamber for your DotLeaf 1.5 vaporizer, so you can get a fresh start.
Inducer firebox Orion V2
Replace the glass tube of your induction heater from Katalyzer, the Orion V2 inductor. This is the same heater (or tube) as the original, to hold your VapCap, with 3 spare silicone pads.
Ricardo Bullette Stem pink glass for Tip...
Rircardo Bullette is a pink glass stem for Tips VapCap Dynavap, with its glass spikes and its 3 blue glass beads it allows to refresh efficiently the vapor while producing a sound effect when shaken. Perfect to enchant your evenings with shamanic theme, it acts as a rattle to accompany you in your travels.
Stainless Steel Tip 2019
The Dynavap titaniul tip is the bowl of many portable vaporizer at Dynavap Entirely made of titanium and supplied with a pre-installed screen
Captive Cap Dynavap
The Dynavap Captiv Cap has the unique ability to hold the Dynavap Tips better, create a better draft and rotate on its own.
BB9 Pink Midsection / pink
The BB9 Pink from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow for a cooler vapor for dry vapers. Supplied without the Cap, Stainless Tip or Ti Tip that you need to use your BB9 Dynavap.
BB9 Grey Midsection / Grey
The BB9 Grey from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow for a cooler vapor for dry vapers. Supplied without the Cap, Stainless Tip or Ti Tip, which are necessary to use your BB9 Dynavap.
Filling pads for Volcano with Solid Valve
Contains 2 pads for Volcano with Solid Valve.
Low temp cap Dynavap
The Dynavap low temp cap fits on all Dynavap tips and allows for lower temperatures. Lower temperatures allow for longer flavors, longer lasting plants and smaller lattes.
Plenty filling chamber - Chambre de...
Filling chamber for the Plenty vaporizer from Storz & Bickel.
