New products
-
Vaphit HX
Kit Vaphit HX from chez Vaphitincluding a mechanical vaporizer (to be...
-
-
Thermal Hyper Cap
The Thermal Hyper Cap (T.H.C.) is DynaVap's solution for transforming a...
Catalog
Spare parts There are 123 products.
Glass Lining TinyMight
Replacement part for your TinyMight vaporizer.May be necessary if you broke this part.
Spikey Vapcap - Glass Charlie - Stem Dynavap
The Bubble stem is made by Katalyzer, compatible with Dynavap tips, so you can have a portable vaporizer with a 100% glass airpath. Three different sizes available. Currentely avalaible size: 6, 8 and 11 cm.
DotLeaf 1.5 Replacement Chamber
This filling and heating chamber for DotLeaf & DotLeaf 1.5 is identical to the original one. Made of PBT, it is comparable to a pod and works with dry plants and resins. Replacement pod/chamber for your DotLeaf 1.5 vaporizer, so you can get a fresh start.
Inducer firebox Orion V2
Replace the glass tube of your induction heater from Katalyzer, the Orion V2 inductor. This is the same heater (or tube) as the original, to hold your VapCap, with 3 spare silicone pads.
Ricardo Bullette Stem pink glass for Tip...
Rircardo Bullette is a pink glass stem for Tips VapCap Dynavap, with its glass spikes and its 3 blue glass beads it allows to refresh efficiently the vapor while producing a sound effect when shaken. Perfect to enchant your evenings with shamanic theme, it acts as a rattle to accompany you in your travels.
Stainless Steel Tip 2019
The Dynavap titaniul tip is the bowl of many portable vaporizer at Dynavap Entirely made of titanium and supplied with a pre-installed screen
Captive Cap Dynavap
The Dynavap Captiv Cap has the unique ability to hold the Dynavap Tips better, create a better draft and rotate on its own.
BB9 Pink Midsection / pink
The BB9 Pink from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow for a cooler vapor for dry vapers. Supplied without the Cap, Stainless Tip or Ti Tip that you need to use your BB9 Dynavap.
BB9 Grey Midsection / Grey
The BB9 Grey from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow for a cooler vapor for dry vapers. Supplied without the Cap, Stainless Tip or Ti Tip, which are necessary to use your BB9 Dynavap.
Filling pads for Volcano with Solid Valve
Contains 2 pads for Volcano with Solid Valve.
Low temp cap Dynavap
The Dynavap low temp cap fits on all Dynavap tips and allows for lower temperatures. Lower temperatures allow for longer flavors, longer lasting plants and smaller lattes.
Plenty filling chamber - Chambre de...
Filling chamber for the Plenty vaporizer from Storz & Bickel.
Heater Kalys 2021 - Heater Cup Generation...
A filling chamber to rebuild the Kalys 2021 portable vaporizer Katalyzer.
Volcano Hybrid filling chamber reducer
Easy Valve Filling Chamber reducer, for Volcano Hybrid from Storz & Bickel
Air filter for Volcano Hybrid
Contains 2 filters for Volcano Hybrid.
Typhoon tube Katalyzer - 8 cm - fumed...
Tube of Typhoon Katalyzer transparent smoked dark borosilicate glass compatible with all Dynavap tips. Enough to turn your favorite portable vaporizer into a goddess. Find the complete Pantheon of tubes Orion: in transparent(Hemera), blue(Ino), purple(Iamos), pink(Venus), green(Alania) or orange(Hestia).
Hemera tube Orion - 8 cm - clear glass...
Hemera Orion transparent tube made of thick borosilicate glass compatible with all Dynavap tips. Enough to turn your favorite portable vaporizer into a goddess.
Alania tube Orion - 8 cm - green glass...
Alania Orion pink tube made of thick borosilicate glass compatible with all Dynavap tips. Enough to turn your favorite portable vaporizer into a goddess.
Venus tube Orion - 8 cm - pink glass stem...
Tube of Venus Orion made of thick borosilicate glass compatible with all Dynavap tips. Enough to turn your favorite portable vaporizer into a goddess.
Ino tube Orion - 8 cm - blue glass stem...
Ino Orion blue tube made of thick borosilicate glass compatible with all Dynavap tips. Enough to turn your favorite portable vaporizer into a goddess.
Hestia tube Orion - 8 cm - orange glass...
Hestia tube Orion in thick borosilicate glass compatible with all Dynavap tips. Enough to turn your favorite portable vaporizer into a goddess.
Dynacoil
The Dynacoil Dynavap is a very practical accessory to vaporize your concentrates like C...B. crystal with your Vapcap. The dynacoil is installed in the tip of your Dynavap vapcap, as simple as that.
Easy Valve filling chamber
Easy Valve filling chamber for Volcano Easy Valve Classic and Digit Storz & Bickel.
Air filter for Volcano Classic and Digit
Contains 2 filters for Volcano Classic and Digit.
Plunger Storz & Bickel
It makes it easy to close the capsules because it catches the lid of the capsule in a very easy way.
Filling Chamber Tool Set
Mighty and Crafty portable vaporizer filling chamber tool set
Glass spacer
This glass spacer for vaporizer measures 9mm in diameter, 6mm high. It fills the space in your bowl and creates a more even vaporization by retaining the heat above the plants. Compatible with many vaporizers - see non-exhaustive list below.
Easy Valve filling chamber + reducer
The capsules of Storz & Bickel, finally in the Volcano !
Enail Ti 14mm or 18mm glass Herborizer
Replacement glass or to transform your Herborizer Ti vaporizer into an e-nail. Available in 14mm or 18mm.Part Herborizer original.
Standard Titanium Condenser (with O-rings)
This Condenser, in titanium, standard size, will be compatible with most VapCap vaporizers with a length of 92mm.
BudKups Packing System
Filling system for BudKups resin and plant cartridges for PAX 3 & 2 vaporizer. Delivered without BudKups.
All Glass Mini Whip, balloon connector Arizer
Glass replacement part for connecting your balloon to your Arizer Extreme Q vaporizer. Male 18mm, female 10mm.
OMNI Titanium Body - DyNaVaP
A Titanium body to customize your VapCap
OMNI Titanium Stem or XL body
A Titanium stem to customize your VapCap
Filling Aid
Filling tool for your Mighty and Crafty vaporizer.Same as the original one sold with these vaporizers.
OMNI Condenser assembly with mouthpiece
The Omni Condenser Assembly with mouthpiece is a Dynavap titanium condenser with adjustable airflow.
Injector glass Ti Herborizer
Replacement glassware for Ti / DigiTi injector
Micro Ti fireplace with or without reducer...
All glass micro Ti focus for micro dosing For use on Herborizerbodies, the 14.5mm to 18.8mm glass adapter/reducer is supplied or not depending on your chosen option.Delivered with a glass nail (filter)
Easy Valve filling chamber reducer
Easy Valve Filling Chamber reducer, for Volcano with Easy Valve from Storz & Bickel
XL Titanium Condenser with O-rings
An XL titanium condenser for VapCap Dynavap portable vaporizer.Compatible with 109mm long bodies/stems.
Injector support Ti / DigiTi Herborizer
The injector holder lets you place your Ti injector or Ti fireplace between your battens without risk of burns. A perfect accessory for your vaporizer Herborizer.
Tuff Bowl Extreme Q / V-Tower - Vaporizer...
The tuff bowl Arizer for Extreme Q and V-Tower vaporizer is a cyclone bowl surrounded by medical silicone. This gives a real impact resistance to this glass piece.
Filling chamber with Plenty reducer
La filling chamber reducer ou réducteur de la chambre de remplissage (ie, le bol) pour vaporisateur Plenty Storz&Bickel est l'accessoire parfait pour consommer moins de plantes dans votre vaporisateur préféré. Cette pièce permet de réduire la taille du bol de votre Plenty et donc de mettre moins de plantes tout en profitant de votre Plenty comme à...
DynaMag
The DynaMag by DynaVap is a small and powerful magnet allowing you to attach your DynaVap to any metallic object. Really handy because you won’t have to find a place to put your hot DynaVap on or it will give you a functional storing place at home.
Titanium Tip
The titanium tip is the bowl of many of Dynavap's portable vaporizers.Made entirely of titanium, it comes with a pre-installed grid.
Aromed Herb holder recreation
The Herb holder recreation is a bowl/chamber for the dry plants and smaller resins than the regular chamber. Having a reduced chamber also means having a smaller air path which will bring a smaller effect of thicker vapor puffs. About 10mm smaller.
XL Condenser Kit
The XL Condenser VapCap Dynavap portable vaporizer kit is a very useful accessory To Buy a XL condenser Kit is to receive:An XL Condenser, a rotary wooden mouthpiece, O-Rings
Injector support XL Herborizer
The XL injector holder Herborizer is the glass part that holds the injector / heating head of your Herborizer vaporizer between the slats.Very practical if you don't want to heat up your glass socket / bowl all the time.
The Cap Dynavap
The Cap is the piece at the tip of the VapCap, master piece, because of its “Click” indicating you that the vaporization temperature is reached. The temperature indicating cap is the signature product of DynaVap. Compatible with every DynaVap vaporizers.
All Glass Transfer Wand
This hand-blown piece by 7th Floor allows you to benefit of an air path of the vapor 100% made of glass on your Silver Surfer vaporizer. The transfer wand in glass is compatible with the SSV in Spherical Ground Glass mode only. If needed, you will have to get a heater-cover in ceramic, spherical ground glass heater cover available on our site.
Standard Shorty Wand
Small transfer wand for vaporizer Silver Surfer vaporizer 7th Floor Vapes. Shorty Transfer Wand for vaporizer SSV in standard mode.
Filler pads for Volcano and Plenty
Contains 2 pads for Volcano and Plenty
Filling chamber reducer for Plenty
The filling chamber reducer for Plenty vaporizer Storz & Bickel is the perfect accessory to consume less plants. This part allows you to reduce the size of the Plenty bowl and therefore put less plants in it while enjoying your Plenty as the original.
Oven Lid for Pax 2 - portable vaporizer
The oven lid is for those who have lost or broken their original oven lid that came with the PAX 2 vaporizer. The oven lid for PAX 2 is an essential accessory for using this portable vaporizer.
Multi Tool PAX
The PAX Portable Vaporizer Multi-tool allows you to quickly clean and compact plants in the vaporizer bowl. This vaporizer accessory hangs like a keychain so it will always stay attached. The silicone case helps to pack your PAX2 bowl and the metal tool empties it. The Multi tool is a practical accessory for PAX 2 owners.
Half Pack Oven Lid Pax 2
The Half pack oven for the Pax 2 portable vaporizer allows you to enjoy from the advantages of your vaporizer even with a half-filled bowl. This accessory for vaporizers allows you to enjoy your Pax 2 from Pax Labs (ex Ploom) and to consume less herbs. The half pack oven lid is a very efficient accessory and a must have for owners of the Pax 2.
Solid Valve chamber insert for volcano...
Official spare part from Storz & Bickel for the Volcano Classic Solid Valve.
Focus Vape ceramic filter set
Contains 3 ceramic filters for Focus Vape
Small Filling Pads for Mighty and Crafty
Contains 4 small pads for Mighty and Crafty.
Cyclone Bowl Extreme Q
The most useful spare part for the Extreme Q fromArizer!
