New products
-
Zenco Flow vaporizer
The Zenco Flow is a vaporizer for concentrates that offers an original,...
-
Accessory set for CAT
Official accessory set for the CAT portable electronic vaporizer from...
-
Accessory set for 2-CON
Official accessory set for the 2-CON portable electronic vaporizer from...
Catalog
Water filter / Bubbler / Glassware There are 48 products.
Air Mess - Air Filter
Air Mess is a dry filter (without water) for your vapor, like a sherlock / J-hook. With its Ø 14 mm joint it will be easy to connect your vaporizer.Its system of glass spikes allows a very effective cooling of the vapor without degrading the flavors contrary to water filtration.
The Proxy Bubbler Katalyzer
Water filter designed for The Proxy from Puffco. The receptacle for The Proxy is located in the center of the bubbler and the bubbler has a sidecar mouthpiece for stability and ease of use. ℹ️ This is not an official accessory Puffco and was designed by Katalyzer, a French brand of glassware and vaporizers.
Water chamber and Carrier cup for daab Ispire
An official replacement bubbler(water chamber) for daab concentrate vaporizers from Ispire. This is the part that acts as a water filter to refresh and humidify the vapor of your CBD extractions like BHO, crumble, rosin, wax, shatter, etc.. It is attached to acarrier cup that will accommodate the inner cup( sold separately).
Bubbler 14 cm Globe Bubble Vape Katalyzer
A globe bubbler designed for durability as well as versatility. Comes complete with stainless steel cage, silicone tubing, glass mouthpiece (for flavor and comfort) and long aerotube (mouthpiece with cooling spikes).
Hydratube 14 mm femelle à 14 mm mâle...
This hydratube / bubbler Katalyzer is a perfect water filter for your portable or living room vaporizers with a 14mm male joint. Perfect for filtering plant particles, refreshing and humidifying vapor.Has a male ♂ Ø 14 mm joint to connect your mouthpiece/hose (optional) and a female ♀ Ø 14 mm joint to connect your vaporizer.
Aerotube for Dynavap
This glass tip has four partitions to compartmentalize, slow down and thus refresh the vapor of your Dynavap tip (not included) while respecting the aromas of your plants. The glass is thick, solid and has a hole dedicated to the airflow as well as a refined tip to better fit the shape of your mouth.
Bubbler for DynaVap tip - Lucas Sauce
This bubbler is designed to hold the tip of your Dynavap vaporizer. It allows you to obtain a small water filtration and holds well in your hand.
Hydratube for V.A.P. (mini bubbler)
The perfect companion to sweeten the vapor of your V.A.P. vaporizer thanks to the small water reservoir of this official bubbler / hydratube. Very easy to use, it is positioned in place of the original mouthpiece.
Katalyzer Peak Glass
Replacement glass for Peak, with percolation, from the brand Katalyzer
Aérotube Dynavap long
This mouthpiece/stem makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without making it wet.
Dynavap bubbler pour tip
This bubbler is designed to receive the tip of your Dynavap vaporizer. It allows you to obtain a small water filtration and holds well in your hand.
Mini Sticky Bubbler
A water filter made exclusively for the Sticky Brick Junior and The Runt. Delivered with its wooden stand.
Phil Trathor - Katalizer - Filtre à eau...
Philomene is a 24 cm bubbler type water filter/pipe, equipped with a percolator with a pommel head that offers the particularity of producing numerous bubbles with little water.
Stundenglass Gravity hookah
The Stündenglass gravity bong is a gravity bong water filter that can be used with a vaporizer. Its system allows for a fairly gentle draw on a vaporizer, this allows for a very light and surprisingly soft steam in the throat. One of the most efficient vapor cooling systems.
Aerotube Mighty
The mini aerotube for Mighty / Crafty+ / Crafty vaporizer is a glass tube that creates a very long vapor path for efficient vaporization. The aerotube fits in place of your Mighty / Crafty+ / Crafty cooling unit and allows you to improve the flavor.
Elev8 Mini recessed recycler 15,5 cm
Mini Tube of about 20 cm hand blown by the team ofElev8 in Colorado. With removable plunger ! Random color
Bubbler 17 cm Beaker Katalyzer
The Beaker bubbler is a 17 cm Beaker-type water pipe/filter, equipped with a percolator with a knob-shaped head that produces numerous bubbles with very little water.
Bubbler starry- Water filter for your...
This bubbler is a water filter for the Starry portable vaporizer. Very useful with its medical silicone whip and its 55cm size, it delivers a completely cold and humid light vapor. Perfect to soften the vapor’s high temperatures or for sensitives throats.
Bubbler 21 cm honeycomb Katalyzer
The Honeycomb bubbler is a 21 cm bubbler type water filter/pipe, equipped with an inline percolator and a honeycomb percolator which offer the particularity of producing numerous bubbles with little water. To protect the Honeycomb bubbler, padded bags are available, one for SSV and one for DBV.
Stem "Turbo" pour ARIZER Solo 1/2 et Air 1/2
This mouthpiece makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without moistening it. Available color: smoked glass.
Bang percolator 6 arms
This is a perfect bong to use as a water filter with your vaporizer. It's intermediate size will fit most users. A bong refreshes your vapor and acts as a 3rd lung for larger inhalations. Glass gasket size of the socket / plunger: 14mm Compatible with most vaporizers.
Bubbler 10 cm Globe Bubble vape Katalyzer
The Globe bubbler is a 10 cm bubbler type water filter/pipe, equipped with a percolator with a pommel head that offers the particularity of producing numerous bubbles with little water. To protect the Globe bubbler, padded bags are available, one for SSV and one for DBV.
Mini Hydratube 10 cm Mighty / Crafty+
This hydratube is compatible with Mighty, Crafty+ and Crafty vaporizers. Mini hydratube with fine mouthpiece for your favorite Storz & Bickel vaporizer.
Bubbler shower head 23 cm Ella Erbien...
This bubbler is a bang water filter/pipe, equipped with a percolator with a pommel head that offers the particularity of producing numerous bubbles with little water. To protect your bubbler, padded bags are available, one for SSV and one for DBV.
Aerotube Arizer ArGo
This mouthpiece makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without moistening it. Two colors available: clear and smoked glass.
Sherlock body Herborizer 18 mm
The Sherlock body from Herborizer is compatible with all the brand's systems, XL, TI and DigiTi. The Sherlock Herborizer has an 18 mm female joint.
Aerotube Mighty Crafty
The aerotube for Mighty / Crafty+ / Crafty vaporizer is a glass tube that creates a very long vapor path for efficient vapor cooling. The aerotube fits in place of your Mighty / Crafty+ / Crafty cooling unit and allows you to improve the flavor.
Bubbler body Herborizer - 18 mm female
This glass bong is the bubbler that comes with the Herborizer Bubbler Ti vaporizer. Available alone, this glass bubbler Herborizer is compatible with most vaporizers on the market
Body Sphere Herborizer
Bang made of high quality borosilicate glass, the Herborizer sphere is compatible with any vaporizer equipped with a bong adapter with 18 mm male/female joint
Hydratube Mighty / Crafty
The Katalyzer hydratube for Mighty portable vaporizers Storz & Bickel allows you to get rid of the plastic vapor passage and get a smoother and more humid vapor. When used without water, this hydrate will cool your vapor and bring out the flavors better than the classicMighty cooling unit that comes with your vaporizer Storz & Bickel.
Alan Beaker - Water filter for vaporizer
Alan Beaker is the XL version of Bubble Vape.
Hydratube Argo fine mouthpiece
This hydrate Katalyzer for portable vaporizer Arizer Argo is very practical and only 6.2 cm above your Argo.
Bubbler 17 cm Side Car Showerhead Phil...
The Phil Trathor is a 17 cm bubbler type water filter/pipe, equipped with a percolator with a pommel head that offers the particularity of producing numerous bubbles with little water. To protect Phil, padded bags are available, one for SSV and one for DBV.
Mini Dee Hydratube - Les Fines Bulles
Les Fines Bulles is a hydratube / water filter dedicated to the Mini Dee portable vaporizer Orion. Made of 2mm thick pirex glass, this water filter fits in place of the original Mini Dee mouthpiece. Supplied in a convenient plastic tube for transport.
Hydratube Fenix Mini wide mouthpiece
The Fenix Mini vaporizer bubbler is a water filter that fits directly into the bowl of the Fenix Mini. Note: this reduces the size of the bowl, and the draft.
Large Hydratube for Arizer Air / Solo
A large mouthpiece that acts as a water filter for the Arizer Solo or Air vaporizer Perfect for filtering vapor with a little water to make it softer and cooler.
Aerotube Arizer Air or Solo
A mouthpiece offering a particularly pleasant airflow, with its small glass recesses that allow the vapor to cool even more than the original Arizer mouthpiece.
Hydratube XMax V2 PRO
Designed for the Xvape or Storm X-max V2 Pro vaporizer. Xvape offers to filter your vapor and soften it - cool it down with this pyrex glass water filter.
Elev8 First Custom Repeatable Minitube -...
The top of the line bubbler "Elev8 Premier Custom Repeatable Minitube" from 7th Floor Vapes Made in Colorado Springs, Colorado ( USA )
Hydratube 10mm - portbale spray accessory
This water filter is a hydratube with a female seal ♀ Ø 10 mm compatible with any male seal ♂ Ø 10 mm. It is also notably compatible with the DaVinci IQ vaporizer.With its Ø 10 mm ground glass gasket, it fits directly on the Ø 10 mm mouthpiece provided with the DaVinci IQ vaporizer.
Hydratube for Starry, Ace and Fog
This bubbler is a water filter for your XMAX Starry V4, Ace, Fog, Crafty, Mighty, Fenix 2.0 or other portable vaporizer on a mouthpiece of similar diameter. With its handy 30cm-long medical-grade silicone tube, it delivers completely cool, slightly humid steam. Perfect for softening steam from high temperatures or for sensitive throats.
Bubbler Adventurer
Bubbler / hydratube made by I-focus for the Adventurer vaporizer. Spillproof - impossible to spill the water in it without blowing into it. Perfect for cooling and humidifying vapor.
Hydratube Focus Vape
Bubbler / Hydra tube manufactured by I-Focus for the vaporizer Focus Vape. Spill proof – You can’t spill the water it contains without blowing inside. Perfect to cool down and moisten the vapor. Compatible with the vaporizers X-Max V2 and Storm.
Hydratube / bubbler 14mm water cooling system
This hydratube / bubbler is a perfect water filter for portable or salon vaporizers that have a 14mm connection. Perfect for filtering plant particles and humidifying vapor.
Bubbler VITAL pyrex filter with water
Designed for Vital vaporizer. TopGreen Tech proposes to filter the vapor and to soften or cool it with this mouthpiece.
Hydratube Solo & Air Easy Flow Arizer
EasyFlow developed a mouthpiece which can also be used to filter water for the vaporizer Arizer Air and the vaporizer Arizer Solo! Goodbye bong, welcome hydra tube! Perfect to filter your vapor with a bit of water to make it softer and fresher.
Sherlock 14 mm or 18 mm Katalyzer
The Sherlock mouthpiece is an accessory for vaporizers designed by Katalyzer, it has been designed in 14 mm or 18 mm.
