New products
-
Arizer Gong Joint 10 / 14 / 18 mm
Gong joint portable vaporizer Arizer Solo or Arizer Air (all models),...
-
Palmer Anlerr
The Palmer from Anlerr is an entry-level vaporizer offering a simple...
-
Pivot Puffco
The latest innovation from Puffco, the Pivot is a new portable vaporizer...
Catalog
Vaporizers' accessories There are 477 products.
Titanium Tip: Halo
The Halo is an official titanium tip from Dynavap (USA) released in October 2024.The fact that it's made of titanium means it heats up and cools down more quickly, enabling fast, even extraction with excellent flavor rendition.The 9 fins on the bottom of the tip limit heat transfer to the stem and ensure optimum vapor cooling, for greater comfort of...
Stainless steel grill set Vaphit
Pack of 10 stainless steel grids from Vaphit. These grids are compatible with all Vaphit mechanical convection vaporizers.
Hyper Cap & tip kit
Package including the Titanium Tip:Hyper (bowl) and HyperCap (cap) for Dynavap 's HyperDyn portable vaporizer at a special price.
Hyper Cap
DynaVap's Hyper Cap is the cap for the HyperDyn portable vaporizer, and is designed specifically to fit the Titanium Tip: Hyper, offering a new vaping experience with this advanced combination.
Tip Titanium: Hyper
DynaVap's titanium Hyper Tip is the bowl of the HyperDyn portable vaporizer and is specially designed to fit the Hyper Cap
14 mm glass adapter Roffu XLux XVape
Telescopic mouthpiece and Ø 14 mm glass 2-in-1 bubbler adapter for XVape Roffu XLux portable vaporizer.
Roffu XLux XVape cooling unit
Official replacement cooling unit for XVape Roffu XLux portable vaporizer. Contains a zirconium spiral to efficiently cool vapor before it reaches the mouthpiece and mouth.
Roffu XLux XVape funnel
This funnel is placed around the heating chamber of XVape's Roffu portable vaporizer to facilitate filling and reduce waste.
Rubilyzer 14 mm microdose dispenser bowl
The Microdose diffuser bowl for Rubilyzer vaporizers from Katalyzer offers a vaporization experience optimized for microdosing, combining convection and conduction for maximum efficiency. We recommend setting your Rubilyzer lower than with a standard heater: start low and gradually work your way up until you're completely satisfied.
Solo adapter 3 - 14 mm
Glass water pipe adapter (WPA) for Arizer Solo III portable vaporizer. Designed by the French brand Katalyzer, this WPA(Water Pipe Adapter) is equipped with a male ♂ roasted glass joint Ø 14 mm. Indispensable for connecting a Solo 3 portable vaporizer to a favorite water filter and enjoying fresher vapor.
Rubilyzer 18 mm microdose dispenser bowl
The Microdose diffuser bowl for Rubilyzer vaporizers from Katalyzer offers an optimized microdosing vaporization experience, combining convection and conduction for maximum efficiency. We recommend that you set your Rubilyzer lower than with a standard heater: start low and work your way up until you're completely satisfied.
Medium Upright Bubbler GRAV
The Medium Upright is a compact premium bubbler (water filter) in borosilicate glass, designed by GRAV Labs (USA). Its fixed downstem extends almost to the base of the bubbler, making it effective with little water and preserving flavors. Its long, 45° mouthpiece prevents splashing. It is fitted with a 14 mm-diameter female joint so that it can be...
Adapter bubbler10/14/18 Venty
Water filter adapter for the Venty from Storz & Bickel. This adapter, designed by the French brand Katalyzer, connects a Venty to a bubbler with a 10 mm, 14 mm or 18 mm diameter female joint.
Zenco Duo glassware
Two official replacement glassware sets to hold the vapor from your Zenco Duo or Flow vaporizer. The glassware includes a removable diffuser in food-grade silicone, guaranteeing good flavor and easy maintenance (with a solution such as iso alcohol or wipes). Its ergonomic shape allows you to sip the vapor as you would a liquid in a glass.
Slush Cup Bubbler GRAV
The Slush Cup is a premium bubbler (water filter) in borosilicate glass, inspired by the famous American cups of the same name and designed by GRAV Labs (USA). Its shape makes it easy to hold in the hand, and the inclination of its mouthpiece means you can take very large puffs without risking drinking water. It is fitted with a 14 mm diameter female...
Coffee Mug Bubbler GRAV
The Coffee Mug Bubbler is a premium-quality, compact water filter with a highly original design inspired by a coffee mug, designed by GRAV Labs (USA). The steam path is integrated directly into the handle of the mug, maximizing the distance traveled by the steam and providing optimal refreshment. It is fitted with a 14 mm diameter female joint for...
Milk Carton Bubbler GRAV
The Milk Carton Bubbler is a Premium borosilicate glass water filter with a highly original design inspired by a milk carton, designed by GRAV Labs (USA). Its design offers abundant steam diffusion, and its narrow mouthpiece, located towards the top of the bubbler, prevents you from drinking water even with strong suction. It is fitted with a 14...
-
Wedge Bubbler GRAV
The Wedge Bubbler is a Premium water filter designed by GRAV Labs (USA). Its elegant, original design is also ergonomic, making it easy to hold. Its top-mounted mouthpiece, combined with the fact that it needs very little water to be effective, means you can avoid drinking water even with strong suction. It has a 14 mm diameter female joint, enabling it...
Rain Bubbler GRAV
The Rain Bubbler is a premium borosilicate glass water filter designed by GRAV Labs (USA). Its soft, elegant curves and small size make it easy to hold. The curved inner walls help swirl the water for optimal cooling. It features a 14 mm diameter female joint for connection to a vaporizer or banger. Supplied with a socket.
Wobble Bubbler GRAV
Premium, compact and stable bubbler (water filter) in high-quality borosilicate glass, designed by GRAV Labs (USA). It features a 14 mm female connection for a vaporizer or banger with a 14 mm male connection (at a 45° angle). Inside, the curved hook-shaped downstem features a row of four holes to diffuse steam into the water. Positioned away from the...
Spherical Pocket Bubbler GRAV
The Spherical Pocket Bubbler is a small, sphere-shaped Premium bubbler (water filter) from Grav Labs (USA). It's one of the smallest bubblers on the market. It's perfect for refreshing the vapor of herbs, resins and concentrates. It features a 10 mm diameter female joint for connecting vaporizers (e.g. Dynavap) or bangers with a 10 mm diameter male joint...
-
Coffee Mug Pocket Bubbler GRAV
This pocket-sized bubbler (water filter) is inspired by a coffee cup. The two-hole percolator cools steam in a small quantity of water, and its 45° mouthpiece prevents unpleasant splashes. Its small glass handle makes it comfortable and safe to hold. This water filter is fitted with a 10 mm diameter female connection, enabling it to be used with...
-
Bamboo tweezers Vaphit
These natural green bamboo tweezers from Vaphit are used to remove the quartz heating cap from a Vaphit vaporizer after one cycle of use. They can also be used to remove the hot cap from other vaporizers (Dynavap, Anvil, etc.). SOLD IN PACKS OF 6
Adapter male 18 to female 14 mm (long)
Glass adapter Katalyzer with male and female joints of Ø 18 mm and 14 mm respectively. It connects a Ø 14 mm ♂ male joint to a Ø 18 mm ♀ female joint, or vice versa.
Tip and Quartz Cap Vaphit X
Capdu Vaphit X stainless steel and quartz tip from Vaphit. The latest version of the manufacturer's quartz tip and cap, with a thicker cap than the QHC for better heat retention and a tip with greater capacity and 6 holes for enhanced convection. Ideal for use on a Vaphit stem, a Dynavap stem or any other Dynavap-compatible stem.The quartz cap features...
Tip and Quartz Cap QHC Vaphit
Stainless steel and Quartz Cap tip from QHC by Vaphit. Ideal for use on a Vaphit stem, a Dynavap stem or any other Dynavap-compatible stem.The Quartz Cap features 1mm or 1.5mm air holes for convection, depending on the option chosen.
Stem Vaphit X
Stainless steel stem for Vaphit X, compatible with Vaphit QHC and Vaphit X tips as well as Dynavap tips. Supplied with 20 quartz balls for steam cooling.
Filling Aid
This filling tool standardizes the process of loading the filling chamber of the Venty, Mighty and Crafty from Storz & Bickel. Thanks to its intelligent design, you'll be able to compact your ground herbs efficiently, guaranteeing even, consistent filling with every use.
Vaphit Quartz Cap v2
Official quartz heating cap for vaporizers Vaphit. Small side holes allow convection once the cap is heated. The cap is available with two different hole diameters to allow more or less air to enter during inhalation. This version is thicker than the previous one (1.5 mm vs. 1 mm), which allows better heat retention and makes the cap a little more solid.
Male adapter 18 to 18 mm
Glass adapter Katalyzer featuring two male ♂ joints in Ø 18 mm, allowing two female ♀ joints in Ø 18 mm to be connected together.
Proxy Ripple
The Ripple is the official water filter (bubbler) from Puffco for the Proxy concentrate vaporizer. With a style as refined as it is functional, this stable bubbler effectively softens and refreshes the often hot vapor of concentrates.
O-rings Vaphit
Official silicone O-ring packs from Vaphit. 4 different O-ring sizes in the pack. Suitable for Vaphit tips, but may also be suitable for other tips depending on their diameter.
3D Pro glass aerotube Vaphit
Official 3D Pro aerotube/mouthpiece from Vaphit. Replacement part for Vaphit QHC 3D Pro Glass Stem Kit vaporizer. Can also be used with Dynavap tips.
Spiked glass aerotube Vaphit
Glass aerotube with pimples from Vaphit for optimum steam cooling. Compatible with Vaphit and Dynavap tips.
Vaphit Quartz Cap
Official quartz heating cap for Vaphit QHC vaporizers. Small side holes allow convection once the cap is heated. The cap is available with two different hole diameters to allow more or less air to enter during inhalation.This cap is also available in a slightly thicker version, which retains heat better and is also a little more solid:Vaphit Quartz Cap V2
Slush Cup Pocket Bubbler GRAV
This small pocket-sized bubbler (water filter) is inspired by the American slush cups with their straw. It's perfect for refreshing the vapor of herbs, resins and concentrates. It features a 10 mm diameter female joint for connecting vaporizers (e.g. Dynavap) or bangers with a 10 mm diameter male joint. The Slush Cup Pocket is supplied with a socket.
Hourglass Pocket Bubbler GRAV
Quality mini bubbler Premium in borosilicate glass designed and manufactured by Grav Labs (USA). This mini water filter is fitted with a 10 mm diameter female joint, ideal for use with a Dynavap, for example. It is also ideal for vaporizing concentrates by adding a banger fitted with a 10 mm diameter male joint. Supplied with a socket.
Helix Chillum GRAV
Quality glass accessory Premium designed and manufactured by Grav Labs (USA) to effectively cool vapor from a vaporizer. The oblique side holes of the Venturi chamber generate a vortex during inhalation for optimal vapor cooling and unrivalled flavor rendition. This accessory can also be used as a pipe/chillum.
Venty Mouthpiece Aerotube
The mouthpiece aerotube for the Venty vaporizer is a glass tube that creates a long vapor path for effective refreshment, replacing the conventional plastic mouthpiece.
Accessory set for CAT
Official accessory set for the CAT portable electronic vaporizer from End Game Labs. This set allows you to have spare parts in case of loss or wear, as well as additional parts such as a glass stem and 1 stainless steel stem to pre-fill for on-the-go use, for example.
Accessory set for 2-CON
Official accessory set for the 2-CON portable electronic vaporizer from End Game Labs. This set provides spare parts in case of loss or wear, as well as additional parts such as ruby beads to add to the convection heating system, or an extra glass stem to pre-fill for on-the-go use, for example.
Adapter 14 and 18 female to 10 and 14 mm male
Adapter Ø 14 and 18 mm ♀ female to Ø 10 and 14 mm ♂ male, for water pipe and vaporizer Adapter for water pipe and filter, to transform a Ø 14 or 18 mm ♀ female joint into a Ø 10 or 14 mm ♂ male joint.
Vapter glass mouthpiece
Colored glass mouthpiece from Katalyzer for the Vapter portable vaporizer and the Xmax V3 Nano. Identical to the original, but in a colorful version for a touch of fun.
WPA Weha
Glass adapter mouthpiece for water filters (WPA) for the Weha portable vaporizer from Katalyzer. Fits any water filter with a 14 mm female connector.
Aerotube Vapter
Spiked mouthpiece/aerotube from Katalyzer for the Vapter portable vaporizer and Xmax V3 Nano. Thanks to its integrated glass pins, this mouthpiece delivers a fresher, smoother vapor than the original glass mouthpiece
Titanium Vapter mouthpiece
Titanium mouthpiece from Katalyzer for the Vapter vaporizer. This mouthpiece is ideal for use on the move, to avoid breaking the original glass mouthpiece.
Siroko VAP 3D cooling mouthpiece
Official replacement 3D cooling mouthpiece (aerotube) for Siroko VAP vaporizer from Katalyzer. Spikes along the vapor path effectively cool the vapor before it enters your lungs while preserving your terps.
Glass stem for WEHA
A replacement glass stem for the Weha, made by Katalyzer.
WEHA dosing capsule
A glass capsule for the Weha vaporizer, from Katalyzer. This capsule, easy to fill and clean, will be useful either to replace a broken capsule, or to have extra capsules to pre-fill for nomadic use, for example.
Dynavap adapter for Wand
This official adapter adapts all Dynavap vaporizers to the Wand, making it quick and easy to heat them hands-free.
AéroClic 2.0 Katalyzer for Dynavap/Vaphit
A well-designed and very robust Katalyzer aerotube, with spiked intercooler for fresh, tasty steam with a Dynavap tip or Vaphit. The mouthpiece is specially designed to fit the shape of your lips and improve comfort of use. The intercooler offers a larger vapor contact surface - along the inside of the aerotube, as well as the outside and inside surfaces...
Venty glass mouthpiece
Glass mouthpiece for Venty vaporizer, offered by the French brand Katalyzer. Replaces the original plastic mouthpiece, better preserving the flavors of your favorite herbs and refreshing the vapor a little more.
Long ball end Tinymight
Beads, the latest trend in vaping, make their appearance in the mouthpiece range for Tinymight and Tinymight 2 mouthpieces. Available in 18 to 20 beads, they will refresh your vapor in a compact format.
Hydratube Venty
The hydratube for Venty, offered by the French brand Katalyzer, is a bubbler (water filter) to be positioned in place of the Venty's cooling unit. The advantage of this hydratube is that it refreshes the vapor while preserving the flavors. It can be used with or without water.
Venty cooling unit
Official Storz & Bickel cooling unit for Venty portable vaporizers, sold individually or in sets of 3. Perfect if you've lost or broken the original unit, or simply to always have a clean one when the other(s) are soaking in iso alcohol.
Mixed gasket set for Venty
Official gasket set from Storz & Bickel containing 11 different sizes and formats of replacement gaskets for the Venty portable vaporizer.
