New products
-
-
Glass mouthpiece Tera
A glass mouthpiece for your Boundless Tera portable vaporizer. Same as...
-
Mixed grilles for Legacy Pro
Contains 3 grids for mouthpiece and 3 grids for air passage.
Catalog
Accessories There are 324 products.
Mixed grilles for Legacy Pro
Contains 3 grids for mouthpiece and 3 grids for air passage.
Crafty cooling units, 3 pieces
Pack of three official cooling units for Crafty and Crafty+ portable vaporizers from Storz & Bickel. ℹ️ Also available individually.
Dynavap Spinning Mouthpiece (bois)
Official rotating wooden mouthpiece for Dynavap mechanical vaporizer.
Replacement Glass Sherlock Body Herborizer...
Official replacement glassware for Herborizer Sherlock Body Ø 18 mm. Supplied without its steel base.
Air Mess - Air Filter
Air Mess is a dry filter (without water) for your vapor, like a sherlock / J-hook. With its Ø 14 mm joint it will be easy to connect your vaporizer.Its system of glass spikes allows a very effective cooling of the vapor without degrading the flavors contrary to water filtration.
Armored Cap - Dynavap
The Armored Cap is a much thicker cap than the original one sold with your vaporizer Dynavap.Its big advantage is that it allows to make only one heating to extract all the active ingredients of your herbs. It delivers thicker inhalations, saves on lighter gas and also produces a slightly hot and dense vapor.
Vaphit x3 triple adapter for Dynavap tips
Stainless steel triple adapter for mounting three Dynavap tips on one stem or adapter for water filters (WPA). ⚠️ Attention, only the adapter is supplied. If you don't have any Dynavap tips/caps, you can add them via the module Essential accessories below.
Revolve Gen 2 stem (MAD Heaters)
An update of their highly successful titanium handle, this Revolve Gen 2 from MAD Heaters is a top-of-the-line stem for Dynavap mechanical vaporizers. It features improved vapor refreshment with advanced airflow control and a high-functioning helical condenser.
Dosing capsule V2 Tinymight 1 & 2
Official V2 dosing capsule for Tinymight and Tinymight 2 portable vaporizers, which fits perfectly into the glass mouthpiece and has holes only at the top and bottom.
The Dani 3 titanium stem
Official spare titanium stem for The Dani 3 vaporizer by Battery-Free Ganz. Also available in anodized (colored) version.
The Dani 3 titanium tip
Official titanium replacement tip for The Dani 3 by Battery-Free Ganz. Also available in stainless steel and in a pack with the cap.
Inception cooling stem - O'Connell Woodworks
Glass mouthpiece to cool the vapor of your VapCap Dynavap thanks to its glass condenser with spikes inside the stem. The latter is designed in thick glass to limit breakage and has a particularly ergonomic mouthpiece, slightly curved for a better grip.
Adapter 14 to 10 mm
Adapter Ø 14 to 10 mm, for water pipes and vaporizers. Glass adapter designed by Katalyzer, featuring a male joint ♂ of Ø 14 mm and a female joint ♀ of Ø 14 mm.
Volcano Solid Valve filling chamber housing
An official replacement housing for the Volcano Solid Valve filling chamber. Includes the top and bottom of the housing, but does not include the filling chamber.
Volcano filling chamber housing
An official replacement housing for Volcano filling chamber. Includes the upper and lower part of the housing, but does not include the filling chamber(Volcano Hybrid and Easy Valve). Also available as a pack with the latter.
OctoTaster GRAV / embout pour TinyMight
A taster made entirely of glass (including the grill) by the Americans from GRAV Labs. The tasters / one hitters allow you to vaporize and taste your plants with a storm lighter or a torch. This clever accessory can also be adapted to the Tinymight and Tinymight 2 vaporizers and thus serve as a mouthpiece.
Hydratube valve for Mighty+ / Crafty+
Mini bubbler to insert in the cooling unit of your Mighty / Mighty+ or Crafty / Crafty+ vaporizer. The perfect accessory for sensitive throats looking to cool and humidify their vapers! ℹ️ This is not an official accessory Storz & Bickel.
Capsule de dosage pour V.A.P.
A dosing capsule for V.A.P. Katalyzer (Xmax V3 Pro) to prepare your sessions in advance or to limit the cleaning needs of the filling chamber of the device. Very practical also to consume resins. ℹ️ Reduced price for 5 capsules (15 €, i.e. 3 € per capsule)
Embout buccal en verre ovale pour V.A.P.
This alternative mouthpiece for the Herbalist Vaporizer (Xmax V3 Pro) has been designed in glass to give it a greater neutrality of flavors.
Heat & Go
Dynamic portable induction heater for vaporizer portable mechanical VapCap DynaVap. Take control over your induction heaters with this sturdy metal case and OLED display.
Stem Arizer Solo & Air 11 cm Katalyzer
A glass stem for portable vaporizer Arizer Solo / Solo 2 and Arizer Air / Air 2 / Air MAX. Designed by the French brand Katalyzer, it measures 7 cm and offers the same features as the aromatubes of the Canadian brand, at a more contained price. This is not an official Arizer accessory.
Set of 2 spacers for Mighty+ and Crafty+...
A set of two glass spacers designed by Katalyzer for the Mighty+ and Crafty+ portable vaporizers (as well as Mighty and Crafty).ℹ️ There is also a circular glass chamber spacer for Mighty+ and Crafty+.
Caddy capsule + 40 dosing capsules Storz &...
Pack including a capsule caddy designed by Katalyzer that can contain 9 capsules and an official set of 40 capsules of dosages Storz & Bickel. The seal helps to cut odors and protect your capsules from moisture and dust. And to make it even more convenient for your steam walks, a key ring will allow you to hang it wherever you want.
Male adapter 14 to 14 mm
Glass adapter having two male seals ♂ in Ø 14 mm designed by Katalyzer. Allows you to connect two female seals ♀ in Ø 14 mm with each other, to adapt a banger or a socket ♀ in Ø 14 mm on a water filter having a female seal ♀ in Ø 14 mm.
Adapter for 10 to 14 mm bong Katalyzer
Adapter 10 to 14 mm female or 14 to 10 male, for water pipe and sprayer. Pipe and water filter adapter, to turn your Ø 10 mm ♀ female joint into a Ø 14 mm ♀ female joint. Glass element designed by Katalyzer to connect your vaporizer to a pipe / water filter (bong). Adaptable on all standard bangs.
Adapter for 10 and 14 mm female bong to 10...
Adapter 10 and 14 mm female to 10 and 14 mm male, for water pipe and sprayer Pipe and water filter adapter, what to turn your Ø 10 or 14 mm ♀ female joint into Ø 10 or 14 mm ♂ male joint. Glass element designed by Katalyzer to connect your vaporizer to a pipe / water filter (bong). Adaptable on all standard bangs.
Plenty Vaporization Unit
An official vaping unit for the Plenty vaporizer from Storz & Bickel and its set of wearing parts. A great way to start out almost new!
Dynavap dosing capsule set Katalyzer
Set of five dosing capsules for VapCap Dynavap. Very practical, they allow you to prepare the sessions in advance and to load the capsules in the vaporizer as you go along, without having to fill the chamber each time. Indispensable for outdoor use! ℹ️ This accessory is not official and was designed by Katalyzer.
Iamos stem Orion - 8 cm - purple glass...
Tube de Iamos transparent purple stem from Orion in thick borosilicate glass compatible with all Dynavap tips. Turn your favorite portable vaporizer into a god. Meet the whole Tubes d'Orion Pantheon : in transparent (Héméria), smoked black (Typhée) blue (Ino), pink (Vénus), green (Alania) or in orange (Hestia).
Universal adapter for Solo / Air Katalyzer
This bubbler/hydratube/bang adapter for the Arizer ArGo portable vaporizer allows you to connect your ArGo directly to your favorite water filter. Compatible with 10, 14 and 18mm female joints.This WPA(Water Pipe Adapter) is not an official product Arizer, it was designed by Katalyzer.
Water chamber and Carrier cup for daab Ispire
An official replacement bubbler(water chamber) for daab concentrate vaporizers from Ispire. This is the part that acts as a water filter to refresh and humidify the vapor of your CBD extractions like BHO, crumble, rosin, wax, shatter, etc.. It is attached to acarrier cup that will accommodate the inner cup( sold separately).
Bubbler 14 cm Globe Bubble Vape Katalyzer
A globe bubbler designed for durability as well as versatility. Comes complete with stainless steel cage, silicone tubing, glass mouthpiece (for flavor and comfort) and long aerotube (mouthpiece with cooling spikes).
Tinymight rimmed basket screen
An official basket screen for Tinymight and Tinymight 2 vaporizers, new version with reinforced borders to be used with the 3D cooling stem, to block the plants at the bottom.
Hydratube 14 mm femelle à 14 mm mâle...
This hydratube / bubbler Katalyzer is a perfect water filter for your portable or living room vaporizers with a 14mm male joint. Perfect for filtering plant particles, refreshing and humidifying vapor.Has a male ♂ Ø 14 mm joint to connect your mouthpiece/hose (optional) and a female ♀ Ø 14 mm joint to connect your vaporizer.
PAX 3 & 2 vented oven lid (sans pusher)
There's nothing like this accessory designed by Cannabis Hardware (formerly New Vape) made of PEEK™, a medical grade heat resistant material, to greatly improve the airflow of your PAX 3 or 2 vaporizer. Especially suitable for use with water filters.
Chamber Lock Ring for Fenix 2.0
Official replacement ring to lock the chamber of your Fenix 2.0.
Drip Pads Set for dosing capsules Storz &...
Drip pads for dosing capsules Storz & Bickel. To place your most delectable drops or crystals, or simply to fill the empty space of the capsule and to be able to vaporize more efficiently small quantities of flowers and resins, while avoiding the fall of possible microparticles in the bowl.
Chambre de remplissage pour Volcano Hybrid
New filling chamber (February 2022) with ceramic coating for Volcano Hybrid .
Connoisseur Bowl for Arizer XQ2 / Extreme...
Filling chamber specially designed by Arizer for XQ2, it will also give a fresh touch to your Extreme Q and V-Tower. Completely made of glass, with two chamber sizes to choose from and plants more or less close to the heater (more details in description).
Grid block for V.A.P.
Replacement parts for the mouthpiece of the Plant Lover's Vaporizer (PLV) Katalyzer. This kit includes a stainless steel screen and the silicone piece holding it in the mouthpiece, identical to the original ones
Perforated Cap - Cap perforé
The perforated Cap of Dynavap fits on all the vaporizers vapcap of the brand. Equipped with microscopic holes it allows an entry of more air which will have the effect of extracting the flavors more gently so to make them last as well as to give more air puffs. Victim of its success, return around January 23, 2022.
Balloon Tube Set
The pack contains 3 x 3 m balloon tube from Storz & Bickel For example, to attach to balloons with adapters
Balloon connector Arizer
A quick and easy way to replace your balloons for Arizer Extreme Q and XQ2, at the size of your choice. Official accessory, identical to the original one.
Air filters for Arizer XQ2
Air filter foams for Arizer XQ2. Official products, they will perfectly replace your original air filters once they are used up, or if you misplace the previous ones. This is one of the nice innovations brought by the Arizer XQ2 compared to the Extreme Q, allowing a filtration of the air entering the device.
Cartouche de filtration + filtres Arizer XQ2
Air filter cartridge and foam for Arizer XQ2. Official product, it will perfectly replace your original air filter once it has been used up, or if you misplace the first one. This is one of the nice innovations brought by the Arizer XQ2 compared to the Extreme Q, allowing a filtration of the air entering the device.
Aerotube for Dynavap
This glass tip has four partitions to compartmentalize, slow down and thus refresh the vapor of your Dynavap tip (not included) while respecting the aromas of your plants. The glass is thick, solid and has a hole dedicated to the airflow as well as a refined tip to better fit the shape of your mouth.
Dab stand in glass Katalyzer
This accessory designed by Katalyzer allows you to gather the necessary items so that you have everything at hand during your dab sessions. Whether it is to store your cotton swabs, your pipe cleaners, your dabbers or your isopropyl alcohol, with its four compartments it will quickly become an essential ally during your aromatherapy sessions with...
Bubbler for DynaVap tip - Lucas Sauce
This bubbler is designed to hold the tip of your Dynavap vaporizer. It allows you to obtain a small water filtration and holds well in your hand.
Hydratube for V.A.P. (mini bubbler)
The perfect companion to sweeten the vapor of your V.A.P. vaporizer thanks to the small water reservoir of this official bubbler / hydratube. Very easy to use, it is positioned in place of the original mouthpiece.
Mouthpiece V.A.P only (Vaporizer for Plant...
Mouthpiece identical to the original one of the V.A.P. (Vaporisateur pour Amateur de Plantes aka XMax V3 Pro for the French-speaking market) which will be able to give a second breath to your device. Ceramic filter and filtration screen not included (see description).
Concentrate cartridge for V.A.P.
Concentrate cartridge for V.A.P. (Vaporizer for Plant Lovers, the French version of Xmax V3 Pro) in medical stainless steel.
V.A.P. Full mouthpiece
Made of silicone, this adapter for bang / bubbler or other water filters like hydratube allows you to connect your vaporizer Katalyzer VAP to all your rooms. This adapter has a 14 and 18 mm male joint.
V.A.P. ceramic filter (airpath)
This airpath ceramic filter made from zirconium is identical to the original included in the V.A.P. (Vaporisateur pour Amateur de Plantes, Vaporizer for Plant Lovers aka Xmax V3 Pro for french talking countries).
Screen for V.A.P. (Vaporisateur pour...
Replacement screen for V.A.P. (Vaporisateur pour Amateur de Plantes) or Xmax V3 Pro for the international version). Same as the original one.
Battery cover for V.A.P.
Replacement battery cover for your Vaporizer for Plant Lovers (V.A.P. aka Xmax V3 Pro for the French market). Identical to the original one, designed in metal and held by two strong magnets.
VAP Adaptateur bang 14 & 18 mm
Made of silicone, this adapter for bang / bubbler or other water filters like hydratube allows you to connect your vaporizer Katalyzer VAP to all your rooms. This adapter has a 14 and 18 mm male joint.
VAP Adaptateur bang 14 & 18 mm
This alternative mouthpiece for the Vaporizerfor Plant Lovers (V.A.P.) has been designed in glass to give it a greater neutrality of flavor.
