New products
-
Vaphit HX
Kit Vaphit HX from chez Vaphitincluding a mechanical vaporizer (to be...
-
Thermal Hyper Cap
The Thermal Hyper Cap (T.H.C.) is DynaVap's solution for transforming a...
-
The BallR Cap
Designed for convection heating, this cap features a perforated design...
Catalog
Vaporizers' accessories There are 509 products.
Cup DynaVap pour Wand Ispire
Heating a Dynavap with a Wand is not very complex, but you have to be careful to position your cap correctly for an even, regular and efficient heating. This glass bowl Katalyzer makes the task much easier, as well as allowing you to leave your Dynavap vaporizer a few seconds longer after the click to obtain a greater density of vapor.
Titanium Heating Component for Tetra
Alternative titanium heating element for Tetra vaporizers from DynaBox. This official product replaces the original glass air inlet tube and gives your brick - besides a more compact size -a different type of heating.
Chamber Lock Ring for Fenix 2.0
Official replacement ring to lock the chamber of your Fenix 2.0.
Filling pads for dosing capsules Storz &...
Contains 4 capsule filling pads Storz & Bickel.
Chambre de remplissage pour Volcano Hybrid
New filling chamber (February 2022) with ceramic coating for Volcano Hybrid .
AéroClic Katalyzer for Dynavap/Vaphit
A well-designed and very robust Katalyzer aerotube, with spiked intercooler for fresh, tasty steam with a Dynavap tip or Vaphit. The mouthpiece is specially designed to fit the shape of your lips and improve comfort of use. The intercooler offers a larger vapor contact surface - along the inside of the aerotube, as well as the outside and inside surfaces...
Grid block for V.A.P.
Replacement parts for the mouthpiece of the Plant Lover's Vaporizer (PLV) Katalyzer. This kit includes a stainless steel screen and the silicone piece holding it in the mouthpiece, identical to the original ones
Perforated Cap - Cap perforé
The perforated Cap of Dynavap fits on all the vaporizers vapcap of the brand. Equipped with microscopic holes it allows an entry of more air which will have the effect of extracting the flavors more gently so to make them last as well as to give more air puffs. Victim of its success, return around January 23, 2022.
1 tube Ballon for Volcano
The pack contains 3 meters of balloon tubing from chez Storz & Bickel compatible with all Volcano and other fixed vaporizers using adaptable balloons.
Balloon connector Arizer
A quick and easy way to replace your balloons for Arizer Extreme Q and XQ2, at the size of your choice. Official accessory, identical to the original one.
Air filters for Arizer XQ2
Contains 4 air filter foams for Arizer XQ2.
Cartouche de filtration + filtres Arizer XQ2
Air filter cartridge and foam for Arizer XQ2. Official product, it will perfectly replace your original air filter once it has been used up, or if you misplace the first one. This is one of the nice innovations brought by the Arizer XQ2 compared to the Extreme Q, allowing a filtration of the air entering the device.
Aerotube for Dynavap
This glass tip features four partitions to compartmentalize, slow down and thus refresh the steam from the Dynavap tip (not supplied), while preserving plant aromas.
Dab stand in glass Katalyzer
This accessory designed by Katalyzer allows you to gather the necessary items so that you have everything at hand during your dab sessions. Whether it is to store your cotton swabs, your pipe cleaners, your dabbers or your isopropyl alcohol, with its four compartments it will quickly become an essential ally during your aromatherapy sessions with...
Clic Clic - Glass body for Dynavap tips
Glass body for Dynavap designed by Katalyzerthe Dynavap glass body, with steam-cooling spikes and integrated glass tip, provides better organoleptic reproduction than the original metal tips. With its compact size, air intake and choice of two mouthpieces, this accessory is a real winner.
Bubbler for DynaVap tip - Lucas Sauce
This bubbler is designed to hold the tip of your Dynavap vaporizer. It allows you to obtain a small water filtration and holds well in your hand.
Hydratube for V.A.P. (mini bubbler)
The perfect companion to sweeten the vapor of your V.A.P. vaporizer thanks to the small water reservoir of this official bubbler / hydratube. Very easy to use, it is positioned in place of the original mouthpiece.
Mouthpiece V.A.P only (Vaporizer for Plant...
Mouthpiece identical to the original one of the V.A.P. (Vaporisateur pour Amateur de Plantes aka XMax V3 Pro for the French-speaking market) which will be able to give a second breath to your device. Ceramic filter and filtration screen not included (see description).
Concentrate cartridge for V.A.P.
Concentrate cartridge for V.A.P. (Vaporizer for Plant Lovers, the French version of Xmax V3 Pro) in medical stainless steel.
V.A.P. Full mouthpiece
Made of silicone, this adapter for bang / bubbler or other water filters like hydratube allows you to connect your vaporizer Katalyzer VAP to all your rooms. This adapter has a 14 and 18 mm male joint.
V.A.P. ceramic filter (airpath)
This airpath ceramic filter made from zirconium is identical to the original included in the V.A.P. (Vaporisateur pour Amateur de Plantes, Vaporizer for Plant Lovers aka Xmax V3 Pro for french talking countries).
Grid for V.A.P. (Vaporizer for Plant Lovers)
Replacement grille for your V.A.P. (Vaporisateur pour Amateur de Plantes, or Xmax V3 Pro internationally). Identical to the original.
Battery cover for V.A.P.
Replacement battery cover for your Vaporizer for Plant Lovers (V.A.P. aka Xmax V3 Pro for the French market). Identical to the original one, designed in metal and held by two strong magnets.
VAP Adaptateur bang 14 & 18 mm
Made of silicone, this adapter for bang / bubbler or other water filters like hydratube allows you to connect your vaporizer Katalyzer VAP to all your rooms. This adapter has a 14 and 18 mm male joint.
VAP Adaptateur bang 14 & 18 mm
This alternative mouthpiece for the Vaporizerfor Plant Lovers (V.A.P.) has been designed in glass to give it a greater neutrality of flavor.
Katalyzer Peak Glass
Replacement glass for Peak, with percolation, from the brand Katalyzer
Aérotube Dynavap long
This mouthpiece/stem makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without making it wet.
Dynavap bubbler pour tip
This bubbler is designed to receive the tip of your Dynavap vaporizer. It allows you to obtain a small water filtration and holds well in your hand.
Adapter for bong 14 and 18 mm female to 14...
Adapter 14 and 18 mm female to 14 and 18 mm male, for water pipe and vaporizer Adapter for water pipe and filter, transforming a 14 or 18 mm female joint into a 14 or 18 mm male joint. Fits all standard bangs
Bubbler GRAV Upline Upright
This water filter is made of high quality borosilicate glass in the USA (Austin, Texas) by GRAVspecialists in premium glassware. It is 22.8 cm high, has a 75 mm tube and a 14 mm sleeve with a glass grid to limit the passage of ash into the bubbler chamber.
Simrell Performance Kit
The Simrell Performance Kit allows you to add an Intercooler to your Dynavap M, Vong or other 62mm straight Stem
Simrell Master Key
Made of antimicrobial brass, the Master Key was designed as a multi-function tool. On one side, you have a rod that allows you to remove an intercooler from a stem with Vortex, on the other side, the concave surface allows you to adjust your Dynavap grills.
Grille and gasket for Fenix Pro
Silicone gasket and grid for Fenix Pro vaporizer.
Glass WPA for WoodScents and DynaVap Ti tips
Adapt your WoodScents or DynaVap titanium tips to your favorite 14mm water filter. Each piece is designed in the USA – from high quality borosilicate glass – to perfectly fit your titanium tips, and will not fit stainless steel tips (all of the M serie, 2019, 2020 and 2021). Just what you needed to renew the way you use your WoodScents or Dynavap titanium...
VAP Adaptateur bang 14 & 18 mm
Made of silicone, this adapter for bang / bubbler or other water filters like hydratube allows you to connect your vaporizer Katalyzer VAP to all your rooms. This adapter has a 14 and 18 mm male joint.
Springs for VapMan
Replacement springs for the portable vaporizer VapMan Classic or Basic.
2nd Generation OMNI XL Condenser Assembly...
The second edition of the XL condenser in Titanium Dynavap with adjustable airflow
Grille and seals for Tafée Bowle
Includes grid and 4 gaskets for Tafée Bowl vaporizer.
Gaskets for Sticky Brick Junior or Runt
Contains 4O-Rings for Sticky Brick Labs Junior AND The Runt portable vaporizers.
Mini Sticky Bubbler
A water filter made exclusively for the Sticky Brick Junior and The Runt. Delivered with its wooden stand.
Titanium Tip - Dynavap - accessoire...
The Dynavap titaniul tip is the bowl of many portable vaporizer at Dynavap Entirely made of titanium and supplied with a pre-installed screen
Titanium Tip - Dynavap - accessoire...
The Dynavap titaniul tip is the bowl of many portable vaporizer at Dynavap Entirely made of titanium and supplied with a pre-installed screen
Stundenglass Gravity hookah
The Stündenglass gravity bong is a gravity bong water filter that can be used with a vaporizer. Its system allows for a fairly gentle draw on a vaporizer, this allows for a very light and surprisingly soft steam in the throat. One of the most efficient steam cooling systems.
Aerotube mouthpiece for...
The Mighty/Mighty+/Crafty/Crafty+ vaporizer mouthpiece aerotube is a glass tube that creates a very long vapor path for effective refreshment, replacing the classic plastic mouthpiece. This aerotube fits in place of your vaporizer's plastic mouthpiece, improving flavor rendition.
Bubbler 24 cm Showerhead Philomene Katalyzer
Philomene is a 24 cm bubbler type water filter/pipe, equipped with a percolator with a pommel head that offers the particularity of producing numerous bubbles with little water.
Stainless Steel Tip 2021
The 2021 version of Dynavap's Stainless Steel Tip, the VapCap M bowl version 2021, is a new addition.Made entirely of stainless steel, and supplied with a pre-installed grid.
OVN-IH
Induction heater (IH) of the latest generation, the OVN-IH for Dynavap vaporizers will follow you everywhere and will be discreet with its 75 mm diameter. Heats up in 5 to 7 seconds.1000mah for about 50 heating sessions.Fast charge by USB-C.
Dynabox Micro
The Dynabox Micro induction heating system is specially designed for Dynavap vaporizers.Compatible with all VapCaps, it allows you to heat up your device in 5 to 8 seconds.
Debowler for Dynavap VapCap
Wooden debowler with neodymium magnet (one of the strongest in the world) to hold your Dynavap vaporizer.
Pusher grille for PAX
An accessory for PAX portable vaporizers, the pusher is a 3D grid designed to screw onto a vented oven lid or non-vented oven lid 2.0. It adjusts the size of the bowl and improves vaporization to deliver bigger puffs.Turn your PAX into a real competitor to Mighty, Crafty, Focus etc.
Starry V3 14/18 bang adapter en céramique
Adapter to connect your XMAX Starry V3, Ace, Crafty, Mighty, Fenix 2.0 or other portable vaporizer to a bong / water pipe / or hydratube. This WPA (water pipe adapter) connects to a bong with a 14mm female joint.
Grids for Le Testeur
Contains 6 grids for Le Testeur.
Mixed grill and gasket set for TinyMight
Contains 6 small gaskets, 6 large gaskets, 2 bowl grids, a mouthpiece grid and a mouthpiece gasket for TinyMight.
Bowl grid for TinyMight
Includes bowl grid for TinyMight.
Glass Lining TinyMight
Replacement part for your TinyMight vaporizer.May be necessary if you broke this part.
A TinyMight capsule
A dosage capsule or for resins for your TinyMight vaporizer.This cartridge is perfect to prepare you cartridges pre-filled.Very practical for dosing especially for koncentré.
End grid Tinymight
Contains a grid for TinyMight.
Spikey Vapcap - Glass Charlie - Stem Dynavap
The Bubble stem is made by Katalyzer, compatible with Dynavap tips, so you can have a portable vaporizer with a 100% glass airpath. Three different sizes available. Currentely avalaible size: 6, 8 and 11 cm.
Mighty Crafty mini aerotube
The mini aerotube for Mighty/Mighty+ or Crafty+ vaporizers is a glass tube that creates a longer vapor path, offering effective cooling. The aerotube takes the place of the cooling unit and also improves flavor rendering.
Mixed grilles and gaskets for ACE
Contains two grids for the bottom of the bowl, two grids for the mouthpiece and two gaskets for XMAX ACE.
