New products
-
Dynavap XL black tube
Black tube for VapCap Dynavap portable vaporizers in XL and classic...
-
Gvape - Anlerr
Anlerr's Gvape is an ultra-compact vaporizer specially designed for dry...
-
Glass injector bowl
Glass injector bowl for ball vapes(Rubilyzer/Thermalyzer/Freelyzer).
Top sellers
Silicone hose for Magic Flight
A hose to cool the vapor from your portable vaporizer Magic Flightsupplied with a dedicated Pyrex mouthpiece.
Mini Dee Adaptabulles
The adaptabulles is an accessory that allows you to connect your Mini Dee Orion vaporizer to all types of water filters on the market with a 10, 14 or 18mm female joint. Supplied with its protective transport tube.
Caddy capsule + 3 resin cartridges for...
This keychain Orion contains 3 resin cartridges for Mini Dee vaporizer Orion. Very practical, waterproof and smellproof.Dimensions: 5.2cm.Weight: 11 grams.
Rosemary 30 grams - whole leaf -...
30 grams of dried rosemary leaves, Rosmarinus Officinalis.
Marjoram - 30g
30 grams of Marjoram flowers and petals = Origanum majorana Grown and hand-picked in France, then packaged by a cooperative workshop in France for Vape D'Orion.
Whip OG standard mini for VaporBrothers
Suction hose and glass with small bowl for your The Original electric vaporizer from VaporBrothers.
VAP Adaptateur bang 14 & 18 mm
Made of silicone, this adapter for bang / bubbler or other water filters like hydratube allows you to connect your vaporizer Katalyzer VAP to all your rooms. This adapter has a 14 and 18 mm male joint.
Aérotube Dynavap long
This mouthpiece/stem makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without making it wet.
Easy Torch Power Flat Lighter
Flat torch lighter with storm flame perfect for your portable vaporizer requiring a hard flame lighter. This small and inexpensive torch lighter is a great way to get started in the world of lighter vaporizers such as the VapCap Dynavap, Katalyste, Sticky Bricks or Scepters fromOrion.
Hydratube valve for Arizer Solo / Air...
Hydratube from Katalyzer for portable vaporizer Arizer Air/Solo. This little side bubbler is ideal for refreshing and humidifying steam, even at high temperatures.
Slim K1 charger Efest
The Slim K1 charger of the brand Efest allows the recharge of any accu / battery up to 1A.It recognizes all alone the battery and adjusts automatically the current of load.Very practical not to impact the life of your 18650 battery or other.Compatible with many batteries, see list below.
Standard Titanium Condenser (with O-rings)
This Condenser, in titanium, standard size, will be compatible with most VapCap vaporizers with a length of 92mm.
Filling pads for Volcano with Solid Valve
Contains 2 pads for Volcano with Solid Valve.
Limpuro Bio Cleaner 1L
Bio cleaner to clean up glass/silicone/metal pieces of a portable vaporizer and desktop vaporizer or your bong, pipe and glass, acrylic and aluminum pieces.
Bubbler for DynaVap tip - Lucas Sauce
This bubbler is designed to hold the tip of your Dynavap vaporizer. It allows you to obtain a small water filtration and holds well in your hand.
Tray Katalyzer
Large metal vaping/rolling tray with Katalyzer colors. An ally of choice for the preparation of your aromatherapy sessions and to facilitate the filling or emptying of your vaporizers!
Fenix Pro Cooling Unit
This cooling unit includes a new mouthpiece for your Fenix Pro portable vaporizer
Dynabox Micro
The Dynabox Micro induction heating system is specially designed for Dynavap vaporizers.Compatible with all VapCaps, it allows you to heat up your device in 5 to 8 seconds.
DYADP - DynaVap Adapter Kit The Wand by...
Induction heating kit for VapCap on The Wand. 2 heating profiles with this kit.
Roffu XLux XVape funnel
This funnel is placed around the heating chamber of XVape's Roffu portable vaporizer to facilitate filling and reduce waste.
Dabber silicone Katalyzer
The silicone overcoat on this metal dabber will prove a lifesaver when it comes to handling your stickiest extractions, or for leftovers stuck to the rim of your container, which are often very difficult to retrieve. One end has a fine, relatively rigid tip, while the other is wider and more flexible, like a spatula.
Fenix Mini Adapter 10, 14, 18 mm
Universal adapter Katalyzer 3-in-1 for Fenix Mini portable vaporizer. This adapter has a 3-in-1 joint, Ø 10, 14 and 18mm male. Very handy for connecting your Fenix Mini portable vaporizer to your favorite water filter.
Front XVape mouthpiece
A mouthpiece for your Avant XVape portable vaporizer Same as the original.
Roffu XLux XVape glass room
Official replacement glass chamber for XVape Roffu XLux portable vaporizer. Supplied with an integrated ceramic filter, it's part of the reason why the aroma is so impeccably neutral. XVape also offers a stainless-steel chamber, which adds a touch of conduction for enhanced vapor production.
Icelandic Mousse - 15g
15 grams of dry Icelandic moss (vulgaris medical).
Vaphit Quartz Heater
The Vaphit Quartz Heater basic kit, supplied without stem.
Focus Water filter adapter Focus Vape...
Water filter adapter with double 14 and 18mm male joint.Compatible with all water filters with a 14 and 18mm female joint.Compatible with the following FocusVape vaporizers - see below.
Anvil Utility Case
Anvil Utility Case for Anvil portable vaporizer from Vestratto. This official aluminum carrying tube lets you store your Anvil even when it's still hot. Compatible with the XL mouthpiece and magnetized for bowl removal and storage.
Double Dynavap adapter Vaphit
Stainless steel double adapter for mounting two Dynavap tips on one stem or adapter for water filters (WPA). Also available in triple. Please note that only the adapter is supplied.
Oval glass tip for V.A.P
Glass part of the oval mouthpiece for V.A.P from Katalyzer. Perfect in case of loss or breakage.
Rubilyzer 18 mm microdose dispenser bowl
The Microdose diffuser bowl for Rubilyzer vaporizers from Katalyzer offers an optimized microdosing vaporization experience, combining convection and conduction for maximum efficiency. We recommend that you set your Rubilyzer lower than with a standard heater: start low and work your way up until you're completely satisfied.
Carta Carb Cap - Focus V
The same carb cap as the original sold with the Carta V2 Focus V. The carb cap is placed on the top of the atomizer once the concentrate is deposited and the heating is started.
Spinning carb cap Katalyzer
Carb cap with holes. Made of glass, it generates a vortex of air inside the banger, distributing the vapor more evenly and removing any residual concentrate.
Reclaim Cup for daab Ispire
An official replacementreclaim cup for daab concentrate vaporizers Ispire. As its name suggests, its role is to collect the unvaporized remains of CBD extractions such as dab, BHO, crumble, rosin, wax, shatter, etc. to allow easy recovery. It is positioned under the inner cup( sold separately).
Chambre 3D Proxy
Official 3D chamber for The Proxy from Puffco. The bottom of the chamber is designed to draw the concentrates during inhalation only to the rim, rather than the bottom. This preserves the quality of the extractions longer, avoids waste and provides a smooth and consistent inhalation by maximizing the flavors.
Air filter for Volcano Classic and Digit
Contains 2 filters for Volcano Classic and Digit.
Chamber Lock Ring for Fenix 2.0
Official replacement ring to lock the chamber of your Fenix 2.0.
14 mm to 14 mm female adapter
Adapter Ø 14 to 14 mm ♀ female, for water pipes and vaporizers. Glass adapter featuring two female ♀ joints in Ø 14 mm designed by Katalyzer. Connects two Ø 14 mm ♂ male joints together.
Vestratto Universal Stem Adapter
The Vestratto Universal Stem Adapter (USA) allows you to adapt your CopperCore bowl from Anvil Vestratto to most stems on the market. Perfect to let your imagination run wild and allow maximum customization.
Stem Vaphit X
Stainless steel stem for Vaphit X, compatible with Vaphit QHC and Vaphit X tips as well as Dynavap tips. Supplied with 20 quartz balls for steam cooling.
Ceramic tip for electronic dabber
Ceramic tip with 510 thread for mounting on a battery with a similar thread to create an electronic dabber. With these dabbers, handling and depositing concentrates in the banger of a dab rig or the atomizer or chamber provided for the purpose is greatly facilitated.
Solid Valve chamber insert for volcano...
Official spare part from Storz & Bickel for the Volcano Classic Solid Valve.
Elev8R Glass Vaporizer – Vaporisateur...
The Elev8r Glass Vaporizer is a portable vaporizer that works with a torch preferably, or any other heating element. Compatible with plants, resins, and concentrates. Inhalation via water filter. The Elev8r is a cheap portable vaporizer made of borosilicate glass that allows a very good flavor and very large slats if the desire is there.
BB6 avec tip et cap Dynavap
With its 10mm AND 14mm female joint it will fit almost all bubblers. Sold ready to use, with tip and Dynavap cap.
Bowl grids for Aromed
Contains 5 stainless steel grids for Aromed
Dab stand in glass Katalyzer
This accessory designed by Katalyzer allows you to gather the necessary items so that you have everything at hand during your dab sessions. Whether it is to store your cotton swabs, your pipe cleaners, your dabbers or your isopropyl alcohol, with its four compartments it will quickly become an essential ally during your aromatherapy sessions with...
Male adapter 14 to 14 mm
Glass adapter having two male seals ♂ in Ø 14 mm designed by Katalyzer. Allows you to connect two female seals ♀ in Ø 14 mm with each other, to adapt a banger or a socket ♀ in Ø 14 mm on a water filter having a female seal ♀ in Ø 14 mm.
Straight hose adapter Ø 14 mm
Water pipe adapter: glass element for connecting your vaporizer to a water filter (bubbler) via a pipe (not supplied). Fits all bongs with a Ø 14 mm ♀ joint.
Vaphit QOQ Bowl
Official replacement quartz bowl for QOQ vaporizer from Vaphit. This is the part that holds the crushed plants and/or resins.
Arizer Solo II Max
With theArizer Solo 2 Max, the Canadian company offers an evolution of the famous Arizer Solo 2. The main evolutions : Improved autonomy USB-C charging Automatic display rotation (very practical for use on water filter/bubbler) Water filter adapter (WPA) included
Whip hands free for VaporBrothers
Hands-free suction hose and glass for your The Original electric vaporizer from VaporBrothers.
Stem Arizer Curved ArGo
Mouthpiece made of opaque black glass or stem, essential accessory for any user of the vaporizer Arizer Solo or Arizer Air! Exist in two forms: Long and short. Compatible with your vaporizer Arizer Solo, Solo 2 and Arizer Air.
PAX anti-odor case
Official PAX odor-resistant hard case. Ideal for storing and/or transporting all PAX vaporizers, as well as small to medium-sized portable vaporizers (see specifications for internal dimensions).
Box 200W GeekVape L200 Classic Mod (Aegis...
Aegis Legend 2, the return of one of the most resistant box of the market. Works with two 21700 mAh batteries not included (supplied with 18650 adapters). A version both smaller, lighter and even more waterproof (IP68 against IP67 on the first version of the Aegis).
Wear & tear set Solid Valve
Wear parts set for your Volcano Solid Valve vaporizer from Storz & Bickel.
Mixed grilles for AirVape X
Contains 3 mouthpiece grids and 3 grids for the AirVape X bowl.
Female adapter 18 to 18 mm
Glass adapter featuring two female joints ♀ in Ø 18 mm and a small side handle (better handling), designed by Katalyzer. Allows you to connect two Ø 18 mm ♂ male seals together, if you have a banger or socket with a Ø 18 mm ♂ seal and want to adapt it to a water filter with a Ø 18 mm ♂ male seal.
