Catalog
Contains 2 condenser seals and 1 mouthpiece seal for VapCap.
The Fat Mouthpiece is an accessory allowing you to connect your vaporizer DynaVap VapCap to a bong with a Ø 14mm female ♀ joint made of glass. Compatible with every vaporizers DynaVap, from the VapCap original to the “M” including the OmniVap and the Ti Woody.
The XL injector holder Herborizer is the glass part that holds the injector / heating head of your Herborizer vaporizer between the slats.Very practical if you don't want to heat up your glass socket / bowl all the time.
Contains 3 stainless steel screens for Dynavap
The Cap is the piece at the tip of the VapCap, master piece, because of its “Click” indicating you that the vaporization temperature is reached. The temperature indicating cap is the signature product of DynaVap. Compatible with every DynaVap vaporizers.
Adapter for water pipe Glass element to connect a vaporizer to a water pipe (bong) Adaptable on all standard bongs
Mouthpiece made of opaque black glass or stem, essential accessory for any user of the vaporizer Arizer Solo or Arizer Air! Exist in two forms: Long and short. Compatible with your vaporizer Arizer Solo, Solo 2 and Arizer Air.
Glass adapter that allows to connect your PAX 3 and PAX 2 portable vaporizer on your filter / water pipe. Available in 2 ground glass joints sizes, male 14 or 18 mm. Discover the easyflow Pax 2 and 3 water tool adapters, a filter that allows to moisturize and cool down the vapor. Perfect for sensitive throat.
Bubbler / hydratube made by I-focus for the Adventurer vaporizer. Spillproof - impossible to spill the water in it without blowing into it. Perfect for cooling and humidifying vapor.
This hand-blown piece by 7th Floor allows you to benefit of an air path of the vapor 100% made of glass on your Silver Surfer vaporizer. The transfer wand in glass is compatible with the SSV in Spherical Ground Glass mode only. If needed, you will have to get a heater-cover in ceramic, spherical ground glass heater cover available on our site.
Compatible with the vaporizer Crafty and Mighty by Störz&Bickel, this piece has to be placed instead of the mouthpiece and its bowl. Allows you to connect your vaporizer Crafty and Mighty directly on a bong / water pipe. Diameter of the joint: 14 or 18mm.
Odor-proof, waterproof and supplied with 4 dosing capsules, the capsule caddy from Storz&Bickel is the perfect accessory for your vaporizer portable Mighty or Crafty. The dosing capsules are placed directly in the chamber of the vaporizer Mighty and Crafty.
Small transfer wand for vaporizer Silver Surfer vaporizer 7th Floor Vapes. Shorty Transfer Wand for vaporizer SSV in standard mode.
Contains 2 pads for Volcano and Plenty
The filling chamber reducer for Plenty vaporizer Storz & Bickel is the perfect accessory to consume less plants. This part allows you to reduce the size of the Plenty bowl and therefore put less plants in it while enjoying your Plenty as the original.
The oven lid is for those who have lost or broken their original oven lid that came with the PAX 2 vaporizer. The oven lid for PAX 2 is an essential accessory for using this portable vaporizer.
Contains 3 grids for Focus Vape
Connect your Arizer Air and Arizer solo portable vaporizer directly to your favorite bang. Available in 14 or 18mm of diameter. The gong joint is made of grounded glass joint which connects perfectly in your slider’s place on your pipe/water filter. Currentely avalaible joint size: Improved air flow.
Störz&Bickel, 1st vaporizer manufacturer in Europe is proposing really handy tool for your portable vaporizer Mighty or Crafty. 40 Capsules and 40 Liquid Pads to fill, re closable, which can directly enter your favorite portable vaporizer. For your concentrates. Test and opinion really positives.
Störz & Bickel 1st vaporizer manufacturer in Europe, is proposing you a really handy tool for your portable vaporizer Mighty or Crafty. 40 Capsules to fill, re closable, and that can be integrated directly into your portable vaporizer. Really positive test and opinion.
The PAX Portable Vaporizer Multi-tool allows you to quickly clean and compact plants in the vaporizer bowl. This vaporizer accessory hangs like a keychain so it will always stay attached. The silicone case helps to pack your PAX2 bowl and the metal tool empties it. The Multi tool is a practical accessory for PAX 2 owners.
The Half pack oven for the Pax 2 portable vaporizer allows you to enjoy from the advantages of your vaporizer even with a half-filled bowl. This accessory for vaporizers allows you to enjoy your Pax 2 from Pax Labs (ex Ploom) and to consume less herbs. The half pack oven lid is a very efficient accessory and a must have for owners of the Pax 2.
This vaporizer accessory allows you to give a second life to your PAX
Glass mouthpiece original Xvape.
Störz&Bickel, 1st vaporizer manufacturer in Europe is proposing really handy tool for your portable vaporizer Mighty ou Crafty. 8 Capsules to fill, re closable and which can enter directly inside your favorite portable vaporizer. Test and opinion really positives, the magazine and its 8 dosing capsules by Störz&Bickel is really handy and can be...
Two small special cartridges for resins and plants that fit into the chamber of the portable vaporizer Focus Vape I-Focus. Capacity 0,2 g. Compatible with Focus Vape, Focus Vape Pro, XMAX V2 Pro, Da Vinci IQ, Vital.
Contains 5 ceramic grids for VaporBrothers.
Contains 3 ceramic filters for Focus Vape
Bubbler / Hydra tube manufactured by I-Focus for the vaporizer Focus Vape. Spill proof – You can’t spill the water it contains without blowing inside. Perfect to cool down and moisten the vapor. Compatible with the vaporizers X-Max V2 and Storm.
This part includes everything needed to replace the top part of the Focus Vape (or head). A head with a gasket, a grid and a ceramic filter.
Small special cartridge for your resins and plants that fits in the chamber of the portable vaporizer Focus Vape I-Focus. Compatible with the focus vape and other vaporizers.
Glass adapter to connect the Focus Vape directly to a water filter or pipe. Available in 14 or 18 mm. Or by pair at an unbeatable price.
A replacement mouthpiece made of glass for your portable vaporizer Focus Vape made by the brand I-Focus.
The wear and tear set for vaporizer Crafty OR Mighty contains everything necessary to rebuild the cooling unit of your portable vaporizer.
Contains 11 gaskets for Mighty.
Glass mouthpiece for Crafty or Mighty portable vaporizer
Contains 3 bowl grids for Pax.
This hydratube / bubbler is a perfect water filter for portable or salon vaporizers that have a 14mm connection. Perfect for filtering plant particles and humidifying vapor.
Designed for Vital vaporizer. TopGreen Tech proposes to filter the vapor and to soften or cool it with this mouthpiece.
Glass mouthpiece for your X-MAX V2 Pro vaporizer. Available in a bong adapter version or mouthpiece. The X-MAX V2 pro is already an excellent vaporizer but for the purists and/or for the water pipes/bongs owners, here are 2 accessories that are necessary!
EasyFlow developed a mouthpiece which can also be used to filter water for the vaporizer Arizer Air and the vaporizer Arizer Solo! Goodbye bong, welcome hydra tube! Perfect to filter your vapor with a bit of water to make it softer and fresher.
Small glass mouthpiece with silicone tip for portable vaporizer Arizer.
Contains 2 domed grids and 2 thin stainless steel grids for Extreme Q.
Contains 4 small pads for Mighty and Crafty.
Contains 6 stainless steel grids for Solid Valve, Volcano Classic and Digit
Suction hose and glass with small bowl for your The Original electric vaporizer from VaporBrothers.
Easy-to-remove hose and suction ceramic for your The Original electric vaporizer from VaporBrothers.
Easy-to-remove suction hose and glass for your The Original electric vaporizer from VaporBrothers.
Hands-free suction hose and glass for your The Original electric vaporizer from VaporBrothers.
Suction hose and glass for your The Original vaporizer from VaporBrothers.
Official Solid Valve Set for Volcano vaporizer from Storz & Bickel.
Easy Valve tip replacement set + Bag
The most useful spare part for the Extreme Q fromArizer!
Contains 6 fine stainless steel grids for Volcano or Plenty salon vaporizers.
Discover the water pipe adapter, which lets you connect your Magic Flight Launch Box portable vaporizer to a water pipe.
The Easy Valve Starter Set for your Volcano vaporizer provides a set of wearing parts, so you don't have to change the balloons yourself. Very practical for users looking for ease of use.
The pack contains 3 x 3 m balloon tube from Storz & Bickel For example, to attach to balloons with adapters
Kit to replace the original balloons included with Arizer salon vaporizers, except V-Tower. This kit contains 4 bags, or UNBONDED food-grade balloons, plus twoFrosted Glass Balloon Mouthpieces with O-rings, silicone seals to secure the balloons to the mouthpiece. Compatibility: Arizer Extreme Q and XQ2
A hose to cool the vapor from your portable vaporizer Magic Flightsupplied with a dedicated Pyrex mouthpiece.
Suction hose for your vaporizer 7th Floor: Da bussha vaporizer, Silver surfer or Life Saber vaporizer. Per 1 meter. Diameter: 14mm