Stainless steel stem for Vaphit X, compatible with Vaphit QHC and Vaphit X tips as well as Dynavap tips. Supplied with 20 quartz balls for steam cooling.
All-glass firebox, including grate, to guarantee the most authentic flavors possible. Features a small right-hand side handle for easy handling, even after heating. Compatible with Ø 14 mm water filters
The Pax 3, portable vaporizer from the brand Pax Labs have many improvements including: 4 pre-set temperatures via Bluetooth. Battery of the PAX vaporizer: 105 min. Oven/Bowl of PAX 3 with an adjustable size with a simple change of bowl. Compatible with dry plants, concentrated and resins. 10g of dried plants and a carry case offered.
Spherical ground glass inhalation kit for your Silver surfer and super surfer vaporizer.The kit includes: A sherical transfer wand, a tube and a glass mouthpiece.
Dynatec's Orion V2 portable induction heating system is specially designed for Dynavap VapCap vaporizers Compatible with stainless tips and titanium tips. Allows you to heat up your Dynavap in 5 to 8 seconds.
The animal-shaped pick to stir! Attention: No choice, Surprise at the sending!
Bubbler / hydratube made by I-focus for the Adventurer vaporizer. Spillproof - impossible to spill the water in it without blowing into it. Perfect for cooling and humidifying vapor.
The Super Surfer V2 Vaporizer from 7th Floor Vapes: one of the most successful vaporizers of the brand 100% glass airflow Direct inhalation via pipe or via a balloon Adjustable temperature and ventilation speed Adjustable LED backlight Comes with a carrying bag and many accessories 10 grams of herbal mix offered
Portable mechanical vaporizer (to be heated with a lighter, preferably a storm) 100% convection, like a Tester Katalyzer or an Elev8r Glass Vaporizer. Unlike the latter, this one integrates a thermal retention system with balls as well as an adaptor tip for water filters Ø 10, 14 or 18 mm.
Standard Wand - Standard wand by Elev8 Glass Gallery for Silver surfer vaporizer with Standard Glass ceramic cover.
Elev8 Glass Gallery SSV standard inhalation kit for your Silver Surfer Vehicule orSuper Surfer Vaporizer.Contains 1 standard wand + 1 1m suction hose + 1 standard mouthpiece
Standard Heater Cover by Elev8 Glass Gallery for SSV vaporizer
Sleeve by Elev8 Glass Gallery for your water filter to connect your Life Saber Vaporizer to a water filter with your choice of 14mm or 18mm gasket
Glass part of the oval mouthpiece for V.A.P from Katalyzer. Perfect in case of loss or breakage.
Large metal vaping/rolling tray with Katalyzer colors. An ally of choice for the preparation of your aromatherapy sessions and to facilitate the filling or emptying of your vaporizers!
A hose to cool the vapor from your portable vaporizer Magic Flightsupplied with a dedicated Pyrex mouthpiece.
The adaptabulles is an accessory that allows you to connect your Mini Dee Orion vaporizer to all types of water filters on the market with a 10, 14 or 18mm female joint. Supplied with its protective transport tube.
This keychain Orion contains 3 resin cartridges for Mini Dee vaporizer Orion. Very practical, waterproof and smellproof.Dimensions: 5.2cm.Weight: 11 grams.
This mouthpiece/stem makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without making it wet.
30 grams of dried rosemary leaves, Rosmarinus Officinalis.
30 grams of Marjoram flowers and petals = Origanum majorana Grown and hand-picked in France, then packaged by a cooperative workshop in France for Vape D'Orion.
Suction hose and glass with small bowl for your The Original electric vaporizer from VaporBrothers.
This Condenser, in titanium, standard size, will be compatible with most VapCap vaporizers with a length of 92mm.
Contains 2 pads for Volcano with Solid Valve.
Made of silicone, this adapter for bang / bubbler or other water filters like hydratube allows you to connect your vaporizer Katalyzer VAP to all your rooms. This adapter has a 14 and 18 mm male joint.
Induction heating kit for VapCap on The Wand. 2 heating profiles with this kit.
Flat torch lighter with storm flame perfect for your portable vaporizer requiring a hard flame lighter. This small and inexpensive torch lighter is a great way to get started in the world of lighter vaporizers such as the VapCap Dynavap, Katalyste, Sticky Bricks or Scepters fromOrion.
Hydratube from Katalyzer for portable vaporizer Arizer Air/Solo. This little side bubbler is ideal for refreshing and humidifying steam, even at high temperatures.
The Slim K1 charger of the brand Efest allows the recharge of any accu / battery up to 1A.It recognizes all alone the battery and adjusts automatically the current of load.Very practical not to impact the life of your 18650 battery or other.Compatible with many batteries, see list below.
A mouthpiece for your Avant XVape portable vaporizer Same as the original.
The Dynabox Micro induction heating system is specially designed for Dynavap vaporizers.Compatible with all VapCaps, it allows you to heat up your device in 5 to 8 seconds.
Bio cleaner to clean up glass/silicone/metal pieces of a portable vaporizer and desktop vaporizer or your bong, pipe and glass, acrylic and aluminum pieces.
The silicone overcoat on this metal dabber will prove a lifesaver when it comes to handling your stickiest extractions, or for leftovers stuck to the rim of your container, which are often very difficult to retrieve. One end has a fine, relatively rigid tip, while the other is wider and more flexible, like a spatula.
Ceramic tip with 510 thread for mounting on a battery with a similar thread to create an electronic dabber. With these dabbers, handling and depositing concentrates in the banger of a dab rig or the atomizer or chamber provided for the purpose is greatly facilitated.
This bubbler is designed to hold the tip of your Dynavap vaporizer. It allows you to obtain a small water filtration and holds well in your hand.
Kit Vaphit HX from chez Vaphitincluding a mechanical vaporizer (to be heated with a torch), a Helix stem, a Ø 14 mm WPA mouthpiece, an accessory for handling the quartz cap when hot and a generous set of spare parts (O-rings and stainless steel grids), all supplied in a practical hard carrying case. In short, a complete vaporization kit that's as...
This cooling unit includes a new mouthpiece for your Fenix Pro portable vaporizer
Anvil Utility Case for Anvil portable vaporizer from Vestratto. This official aluminum carrying tube lets you store your Anvil even when it's still hot. Compatible with the XL mouthpiece and magnetized for bowl removal and storage.
Official silicone protective cover for XVape's Roffu portable vaporizer.
Official 3D chamber for The Proxy from Puffco. The bottom of the chamber is designed to draw the concentrates during inhalation only to the rim, rather than the bottom. This preserves the quality of the extractions longer, avoids waste and provides a smooth and consistent inhalation by maximizing the flavors.
The Vaphit Quartz Heater basic kit, supplied without stem.
Universal adapter Katalyzer 3-in-1 for Fenix Mini portable vaporizer. This adapter has a 3-in-1 joint, Ø 10, 14 and 18mm male. Very handy for connecting your Fenix Mini portable vaporizer to your favorite water filter.
Water pipe adapter: glass element for connecting your vaporizer to a water filter (bubbler) via a pipe (not supplied). Fits all bongs with a Ø 14 mm ♀ joint.
Stainless steel double adapter for mounting two Dynavap tips on one stem or adapter for water filters (WPA). Also available in triple. Please note that only the adapter is supplied.
The Vestratto Universal Stem Adapter (USA) allows you to adapt your CopperCore bowl from Anvil Vestratto to most stems on the market. Perfect to let your imagination run wild and allow maximum customization.
Official protruding mouthpiece for PAX 2, PAX 3, PAX Plus and PAX Mini portable vaporizers. Not compatible with PAX 1.
Official PAX odor-resistant hard case. Ideal for storing and/or transporting all PAX vaporizers, as well as small to medium-sized portable vaporizers (see specifications for internal dimensions).
Official replacement quartz bowl for QOQ vaporizer from Vaphit. This is the part that holds the crushed plants and/or resins.
15 grams of dry Icelandic moss (vulgaris medical).
Carb cap with holes. Made of glass, it generates a vortex of air inside the banger, distributing the vapor more evenly and removing any residual concentrate.
An official replacementreclaim cup for daab concentrate vaporizers Ispire. As its name suggests, its role is to collect the unvaporized remains of CBD extractions such as dab, BHO, crumble, rosin, wax, shatter, etc. to allow easy recovery. It is positioned under the inner cup( sold separately).
LSV Transfer wand by Elev8 Glass Gallery for your Life Saber Vaporizer.Identical to the original. ℹ️ Also available in a shorter version.
Water filter adapter with double 14 and 18mm male joint.Compatible with all water filters with a 14 and 18mm female joint.Compatible with the following FocusVape vaporizers - see below.
Contains 2 filters for Volcano Classic and Digit.
Adapter Ø 14 to 14 mm ♀ female, for water pipes and vaporizers. Glass adapter featuring two female ♀ joints in Ø 14 mm designed by Katalyzer. Connects two Ø 14 mm ♂ male joints together.
The same carb cap as the original sold with the Carta V2 Focus V. The carb cap is placed on the top of the atomizer once the concentrate is deposited and the heating is started.