The M 2021 VapCap Dynavap

The 2021 "M" is the latest version of the best-selling, 100% medical grade stainless steel "M" VapCap Original from Dynavap

In stock

New improvements brought by Dynavap's The 2021 M:

• New Cape called "Captiv Cap"
• Faceted serrated tip (the herb/resin bowl) with a redesigned print
• Adjust-a-bowl technology to reduce bowl size by 50% for micro-dosing
• Double air inlets called "Chiral", i.e. asymmetrical for a high turbulence air injection
• 10 mm diameter mouthpiece for some water filters

The team of La Centrale Vapeur would like to inform you that on the Cape, marks are more or less visible. They are machining and welding marks. Some Capes show traces of heating, it is simply the metal which reacts to the heat during the welding or the cutting. These marks or discolorations are quite normal, and do not interfere with the operation of the Cap.

The real innovation of Dynavap, present on all the portable vaporizers of the brand Dynavap Vaporizer, is a temperature control by sound.

As soon as the vaporization temperature is reached (about 190°C) the cap of the vaporizer emits a small "click" indicating you to stop the heating immediately. A second, louder click indicates that you really need to stop because the combustion is too close.

After a few seconds, as soon as the vaporizer is cold enough for the next heating cycle, a 3^ème click is heard.

Your Dynavap vaporizer is then ready to be heated again until you hear a click indicating that the vaporization temperature has been reached and that the VapCap no longer needs to be heated. And so on.

In addition, a small hole located on the device, just under the mouthpiece allows you to regulate more or less the air flow and therefore the density of your inhalations.

Finally, because of the way it works, it is a perfect portable vaporizer for resins.

The flavors and the density of vapor produced by the VapCap is bluffing, its size and its simplicity of use are simply brilliant. A must have for any self-respecting vaporizer aficionado who needs a portable but qualitative vaporizer.

To buy a The 2021 "M" VapCap portable vaporizer is to receive :

• 1 x The 2021 "M" portable vaporizer
• 1 x VapCap user manual

+ The welcome kit La Centrale Vapeur =

• A carrying case offered by LCV
• A mix of 10 grams of plants (Damiana or other).
• a turbo lighter that will allow you to wait to buy a real lighter

Night nurse.

Technical characteristics of the The 2021 "M" VapCap :

• Stainless steel and medical silicone
• Very small = 92 mm
• Lightweight = 19.5 grams
• Heats up in seconds (3 to 5 seconds) with a storm lighter
• Can be heated with any heat source (candle, ember, light bulb etc.)
• Very good aroma rendering
• Temperature more or less variable with knowledge, depending on the location of the flame during heating

The 2021 "M" VapCap Vaporizer Instructions:

First of all, we advise you to practice with a vaporizer empty of any substance

• Remove the small metal cap from the "M" 2021
• Fill the stainless steel bowl of the "M" 2021 (not the cap) with dry crumbled plants or resin
• Close the course of the "M" 2021
• Heat the "M" 2021 on the side of the cap, while turning, until you hear a click

ATTENTION: DO NOT HEAT FROM THE END! But only on the sides of the cape !

• After the click, turn off the heater and inhale
• If you continue to heat after 1^er click, a second click will be heard indicating that it is absolutely necessary to stop the heating because otherwise the combustion will take place and this overheating tends to damage the heading
• Before you start a new heat run:
• Wait for a 3^ème click (or 30 seconds if you did not hear anything) to let it cool down
• You can then start heating again until your bowl is completely vaporized
• You can then repeat the procedure and heat until you hear a click and so on until your bowl is fully vaporized (dark brown plant and more steam)
• To fill and empty the bowl of your "M" 2021 a simple aspiration and a simple blow are enough

Be careful not to burn yourself, so remember to let your "M" 2021 cool down before putting your fingers in it.

Video and instructions for the VapCap M Dynavap:

For more flavors:

Take advantage of our offer flavor "VapCap M likes", to discover the purity of flavors with a glass body for 9 euro extra.

To take advantage of this offer, select the desired tube under the "Buy" button.

For a real lighter:

A good storm lighter / torch will allow you to heat up your Dynavap vaporizer faster.

Find all our lighters / torches storm flame for portable vaporizers here

To do without a lighter at home, you can equip yourself with the v2 induction heating Orion available here.

For storage:

Sold without transport tube, you can find them here, the Dynavap storage tube allows you to store your VapCap after use.

To store it with grass next to it there is the Dynastash and the Dynaquad stash.

For the presentation:

A cheap stand for portable vaporizer such as this one from Orion will allow you to place one to two VapCap Dynavap vertically.

Perfect for preventing your M 2021 vaporizer from rolling away by accident.

To filter the steam directly onto a suitable water filter or bong:

Special offer with the purchase of your vaporizer, get a 9 € discount on the purchase of one of our bubblers or bangs marked "Bubble Vape"

To do so, you just have to enter the following code before paying BUBBLEVAPE

Buying a bubbler for your vaporizer allows you to humidify and cool your vapor which is very nice for temperatures above 200°C as well as for throats sensitive to dry steam, even cold.

In the picture, the Dynavap sprayer is mounted on the bubbler with a fat mouthpiece available here.