The 2021 M Obsidium

The "M" ObsidiuM is the latest version of Dynavap's best selling, 100% medical grade stainless steel "M" VapCap Original.

New improvements brought by Dynavap's The M ObsidiuM:

• New Cape called Captiv Cap;
• Faceted serrated tip (the herb/resin bowl) with a redesigned draw;
• Technology Adjust-a-bowl allowing to reduce the size of the bowl by 50% for microdosing;
• Double air inlet called "Chiral"This means asymmetrical for high turbulence air injection;
• Mouthpiece with a diameter of 10 mm for some water filters.

⚠️The team of La Centrale Vapeur would like to inform you that on the cape, marks are more or less visible. They are machining and welding marks. Some caps show traces of heating, it is simply the metal that reacts to the heat during the welding or cutting. These marks or colorations are quite normal, and do not interfere with the operation of the cap.

The real innovation of Dynavap, present on all the portable vaporizers of the brand Dynavap Vaporizer, is a temperature control by sound.

As soon as the vaporization temperature is reached (approx. 190 °C) the cap (or the cap) of the vaporizer emits a small "click" indicating that you must stop the heating immediately. A second, louder click indicates that you really need to stop because the combustion is too close.

After a few seconds, as soon as the vaporizer is cold enough to initiate a new heating, a 3^ème click is heard.

Your Dynavap vaporizer is then ready to be heated again until you hear a click indicating that the vaporization temperature has been reached and that the VapCap no longer needs to be heated. And so on.

In addition, a small hole located on the device, just under the mouthpiece allows you to regulate more or less the air flow and therefore the density of your inhalations.

Finally, because of the way it works, it is a perfect portable vaporizer for resins.

The flavors and the density of vapor produced by the VapCap is bluffing, its size and its simplicity of use are simply brilliant. A must have for any self-respecting vaporizer aficionado who needs a portable but qualitative vaporizer.

To buy a portable vaporizer The "M" ObsidiuM VapCap is to receive :

• 1 x portable sprayer The "M" color ObsidiuM ;
• 1 x VapCap user manual ;

+ La Centrale Vapeur welcome kit :

• 1 x carrying case offered by LCV;
• 1 x 10 grams pack of plants (Damiana or other).
• 1 x turbo lighter that will allow you to wait to buy a real lighter

Technical characteristics of The "M" ObsidiuM VapCap :

• Stainless steel and medical silicone;
• Very small = 92 mm ;
• Lightweight = 19.5 grams;
• Heats up in seconds (3 to 5 seconds) with a storm lighter;
• Can be heated with any heat source (candle, ember, light bulb, etc.);
• Very good aroma;
• Temperature more or less variable with knowledge, depending on the location of the flame during heating.

Instructions for use of The "M" ObsidiuM VapCap :

First of all, we advise you to practice with a vaporizer empty of any substance

• Remove the small metal cap from the "M" ObsidiuM ;
• Fill the stainless steel bowl with "M" ObsidiuM (not the cap) with dry crumbled plants or resin;
• Close the "M" ObsidiuM cap;
• Heat the "M" ObsidiuM on the side of the heading, while turning, until you hear a click.

ATTENTION: DO NOT HEAT FROM THE END! But only on the sides of the cape !

• After the click, turn off the heater and inhale;
• If you continue to heat after 1^er click, a second click will be heard indicating that it is absolutely necessary to stop the heating because otherwise the combustion will take place and this overheating tends to damage the heading;
  Before you start a new heat run:
• Wait for a 3^ème click (or 30 seconds if you didn't hear anything) to let it cool down;
• You can then start heating again until your bowl is completely vaporized;
• You can then repeat the procedure and heat until you hear a click and so on until your bowl is fully vaporized (dark brown plants and more steam)
• To fill and empty the bowl of your "M" ObsidiuM a simple aspiration and a simple blow are enough

Be careful not to burn yourself, so remember to let your "M" cool down before putting your fingers in it.

Video and instructions for the VapCap M Dynavap:

For more flavors:

Discover the purity of flavors thanks to a glass body.

To take advantage of this offer, select the desired tube under the "Buy" button.

For a real lighter:

A good storm lighter / torch will allow you to heat up your Dynavap vaporizer faster.

Find all our lighters / torches storm flame for portable vaporizers here

To do without a lighter at home, you can equip yourself with the v2 induction heating Orion available here.

For storage:

Sold without transport tube, you can find them here, the Dynavap storage tube allows you to store your VapCap after use.

To store it with grass next to it there is the Dynastash and the Dynaquad stash.

For the presentation:

A cheap stand for portable vaporizer such as this one from Orion will allow you to place one to two VapCap Dynavap vertically.

Perfect for keeping your "M" sprayer from rolling under the table.

To filter the steam directly onto a suitable water filter or bong:

Special offer with the purchase of your vaporizer, get a 9 € discount on the purchase of one of our bubblers or bangs marked "Bubble Vape"

To do so, you just have to enter the following code before paying BUBBLEVAPE

Buying a bubbler for your vaporizer allows you to humidify and cool your vapor which is very nice for temperatures above 200°C as well as for throats that are sensitive to dry, even cold vapor.

In the picture, the Dynavap sprayer is mounted on the bubbler with a fat mouthpiece available here.