Catalog
This 2-in-1 wooden case compatible with all M Dynavap vaporizers is made in Poland by Dynabox and equipped with neodymium magnets.Designed to stay closed even if dropped.
Induction heater (IH) of the latest generation, the OVN-IH for Dynavap vaporizers will follow you everywhere and will be discreet with its 75 mm diameter. Heats up in 5 to 7 seconds.1000mah for about 50 heating sessions.Fast charge by USB-C.
The Dynabox Micro induction heating system is specially designed for Dynavap vaporizers.Compatible with all VapCaps, it allows you to heat up your device in 5 to 8 seconds.
Compatible with all M Dynavap vaporizers, this wooden case, made in Poland by Dynabox is equipped with powerful neodymium magnets, and is designed to remain closed even in the event of a fall.
Wooden debowler with neodymium magnet (one of the strongest in the world) to hold your Dynavap vaporizer.
An accessory for PAX portable vaporizers, the pusher is a 3D grid designed to screw onto a vented oven lid or non-vented oven lid 2.0. It adjusts the size of the bowl and improves vaporization to deliver bigger puffs.Turn your PAX into a real competitor to Mighty, Crafty, Focus etc.
The Runt from Sticky Brick Labs is an American portable vaporizer that works simply and intuitively with a torch lighter. This vaporizer is designed to be used dry, i.e. without a water pipe. Simply hold the flame up to the air intake and inhale at the same time. Made entirely of wood and glass in the USA, the flavors are very pleasant and inhalations can...
Adapter to connect your XMAX Starry V3, Ace, Crafty, Mighty, Fenix 2.0 or other portable vaporizer to a bong / water pipe / or hydratube. This WPA (water pipe adapter) connects to a bong with a 14mm female joint.
Contains 6 grids for Le Testeur.
The Tester is a vaporizer 100% convection all glass. Compatible with plants and resins. Designed for micro dosing and flavor tasting. Works with a torch lighter -not provided- Several types of heating possible going from soft to very strong and fast. Compatible with Dynavap tips and cap.
Contains 6 small gaskets, 6 large gaskets, 2 bowl grids, a mouthpiece grid and a mouthpiece gasket for TinyMight.
Includes bowl grid for TinyMight.
Replacement part for your TinyMight vaporizer.May be necessary if you broke this part.
Extra-long, steam-cooling tube for TinyMight vaporizers - with its extra-long length, it cools steam efficiently.
A dosage capsule or for resins for your TinyMight vaporizer.This cartridge is perfect to prepare you cartridges pre-filled.Very practical for dosing especially for koncentré.
Contains a grid for TinyMight.
Looking for a mighty case or other transport box for your vaporizer?The Pelicase Vape Case Katalyzer 18X allows you to safely store your favorite vaporizer. Depending on the vaporizer the 18X Katalyzer allows you to store your vaporizer and some accessories.Dimensions and list of compatible vaporizers below.
The Bubble stem is made by Katalyzer, compatible with Dynavap tips, so you can have a portable vaporizer with a 100% glass airpath. Three different sizes available. Currentely avalaible size: 6, 8 and 11 cm.
A cleaning brush for your vaporizer and accessories. With its hard bristles and metal shaft, this swab should do the trick. Do not use in a hot vaporizer chamber/bowl.
The mini aerotube for Mighty/Mighty+ or Crafty+ vaporizers is a glass tube that creates a longer vapor path, offering effective cooling. The aerotube takes the place of the cooling unit and also improves flavor rendering.
Contains two grids for the bottom of the bowl, two grids for the mouthpiece and two gaskets for XMAX ACE.
Aromatube Arizer 70 mm long, this mouthpiece or stem is compatible with vaporizer Arizer Solo 1, Solo 2 and Arizer Air 1 and 2. Stem or aroma tube mouthpiece, an essential accessory for vaporizer arizer Solo or Arizer Air!
The Snap Stash is a small plastic box that opens with a simple squeeze of the finger Very practical, the pop top keeps the plants very well on the short term.
This filling and heating chamber for DotLeaf & DotLeaf 1.5 is identical to the original one. Made of PBT, it is comparable to a pod and works with dry plants and resins. Replacement pod/chamber for your DotLeaf 1.5 vaporizer, so you can get a fresh start.
The DynastashER is a Dynastash disposing of a small storing place in silicon incorporated in the wood. Really handy to transport the concentrates.
The A7 torch lighter has two flames. Robust it will follow you everywhere, with its protection of ignition by clapper it should hold you long.
Contains 2 grids for Avant XVape mouthpiece.
Contains 2 grids for Avant XVape.
A mouthpiece for your Avant XVape portable vaporizer Same as the original.
Discover the DotLeaf 1.5, the portable vaporizer for your plants and resins RE thought by DotMod the famous e-cig brand. New PBT vaporization chamber, better temperature control among improvements. 4 temperatures. Removable 18650 mAh battery - not included Hot and dense vapor.
The vital is already an excellent vaporizer but for the purists and/or for the water pipes/bongs owners, here’s a very popular accessory.
The M starter Pack 2021 with Dynacoil gets you started on the right foot with your vaporizer portable Dynavap Vapcap. Complete pack ready to vaporize - Butane gas to buy and necessary as lighter is empty.
The Limpuro Grinder Cleaner is a multi-functional, disinfecting cleaner made in Germany. It is used to clean grinders, wooden, metal and glass pipes.
Replace the glass tube of your induction heater from Katalyzer, the Orion V2 inductor. This is the same heater (or tube) as the original, to hold your VapCap, with 3 spare silicone pads.
The 2021 Omni is Dynavap's latest luxury VapCap with a 100% titanium body AND new finishes. The 2021 Omni is a premium, all-titanium, non-electric portable vaporizer that works with a torch lighter. Unlike the classic models, its air flow or draw is fully adjustable.
Storm flame torch lighter perfect for your portable vaporizer that requires a hard flame lighter. This small and inexpensive torch lighter is a great way to get started in the world of lighter vaporizers such as the VapCap Dynavap, Katalyste, silencio, stickybricks or Scepters from Orion.
The mod box Voopoo Drag X Plus is a box offering great autonomy, powerful vape, and real ease of use. Drag X Plus offers two modes of use, perfect for the Glow RCV 18 vaporizer or the Kalys from Katalyzer for example.
The 2021 "M" is the latest VapCap from Dynavap with the same stainless steel body, AND new finishes. Free turbo lighter. The 2021 "M" VapCap is a portable, non-electric vaporizer that works with a torch lighter. With its temperature control by sound, it is a very good portable vaporizer. The flavour rendering and ease of use are great.
An 18mm diameter cap to plug your bong / hydrant / water filter for easy cleaning.Very useful with our cleaners such as grunge off or limpuro for example.Two sizes of diameter of cap to choose: 14 and 18mm
The Elev8r Glass Vaporizer is a portable vaporizer that works with a torch preferably, or any other heating element. Compatible with plants, resins, and concentrates. Inhalation via water filter. The Elev8r is a cheap portable vaporizer made of borosilicate glass that allows a very good flavor and very large slats if the desire is there.
The Maxtech torch lighter made by Vector has a torch flame and a large tank.Very practical for heating your favorite portable vaporizer. Available color: Black Are you tired of buying new lighters regularly? So are we! No Proof Warranty Vector! See below. Made in the USA.
The Keck clip is a metal piece, very useful for your bong, it allows to attach 2 glass elements together. For example, the stem with the slider and/or the bong’s stem. Once the piece is set, it is possible to turn around your glass pieces, they will stay together. Useful for some vaporizers like the Ti or XL Herborizer.
3mm Silicon Carbide (SiC) beads for banger, insert or bowl.
Contains 2 gaskets for Quartz Quest.
Kit includes : siC replacement bowl for Divine Tribe Quartz Quest 2 x ceramic replacement coil for Quartz Quest
kit including ceramic donut and 13 mm spacer to replace the titanium or quartz cups of your Crucible V4 vaporizer for concentrates from Divine Tribe.
Contains 2 gaskets for Crucible V4.
Mini Tube of about 20 cm hand blown by the team ofElev8 in Colorado. With removable plunger ! Random color
The Beaker bubbler is a 17 cm Beaker-type water pipe/filter, equipped with a percolator with a knob-shaped head that produces numerous bubbles with very little water.
This bubbler is a water filter for the Starry portable vaporizer. Very useful with its medical silicone whip and its 55cm size, it delivers a completely cold and humid light vapor. Perfect to soften the vapor’s high temperatures or for sensitives throats.
The Honeycomb bubbler is a 21 cm bubbler type water filter/pipe, equipped with an inline percolator and a honeycomb percolator which offer the particularity of producing numerous bubbles with little water. To protect the Honeycomb bubbler, padded bags are available, one for SSV and one for DBV.
This mouthpiece makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without moistening it. Available color: smoked glass.
Black tube for VapCap Dynavap portable vaporizers in XL and classic sizes such as OmniVap XL, HydraVonG XLS or M 2018, 2019, 2020, OmniVong, 2021, M+, M7, M7XL, Unidyn, etc.
This bundle consists of a Dynavap M 2021 vaporizer and the Click and Go induction heater Katalyzer. The Click and Go induction heater allows for approximately 50 heatings, just gently place your M 2021 in the hole and wait for the click.
A resin and herb cartridge for your portable vaporizer Arizer Air / Solo 2 and 1 Made of stainless steel, this reusable capsule keeps your vaporizer chamber clean. Available in two versions: Closed" version: capsule open on top and bottom / closed on sides Open" version: capsule open on top and bottom AND open on sides
A complete mouthpiece for Xmax Ace portable vaporizer. Same as the original, sold individually.
This is a perfect bong to use as a water filter with your vaporizer. It's intermediate size will fit most users. A bong refreshes your vapor and acts as a 3rd lung for larger inhalations. Glass gasket size of the socket / plunger: 14mm Compatible with most vaporizers.
The Katalyste Honey Puff Chillum is a small glass vaporizer designed to vaporize your dry plants and resins with a torch lighter. Very easy to use, its glass vapor passage and its mix of convection and conduction allows an effective and simple vape.
Small drip tip 510 2S acrylic brand Aspire.Compatible with many vaporizers and most e-cig atomizers on the market.