Le Sceptre de Iamos - Purple Glass Stem for Dynavap

Buy a Sceptre de Iamos transparent violet spray and receive:

• 1 x glass tube Sceptre de Iamos Orion 8 cm long - transparent violet glass;
• 1 x Dynavap cap ;
• 1 x Dynavap The B stainless steel tip;
• 1 x Dynavap XL storage tube for storing your hot Sceptre if necessary.

Technical specifications of the Sceptre vaporizer Orion:

• Borosilicate glass;
• Very small = 110 mm ;
• Lightweight = 40 grams;
• Heats up in seconds (3 to 5 seconds) with a storm lighter;
• Can be heated with any heat source (candle, ember, light bulb, etc.);
• Excellent aroma thanks to glass body;
• Efficient vapor cooling thanks to 7 glass pins that lengthen the vapor's passage;
• Total length of steam cooling 10.7 cm instead of the 8 cm length of the scepter's glass body;
• Temperature more or less variable with skill, depending on the location of the flame during heating.

How to use the Sceptre vaporizer :

First of all, we advise you to practice with an empty vaporizer:

1. Remove the small metal cap from the Sceptre;
2. Fill the Sceptre's stainless-steel bowl (not the cap) with dried, crumbled plants or resin;
3. Close the Sceptre cap;
4. Heat the Sceptre on the metal cap side, while turning, until you hear a click
   

   ⚠️ ATTENTION: do not heat the end of the cap (like a cigarette),but only the sides (see video below).

5. After the click, stop heating and inhale.
6. If you continue to heat after the^1st click, a second click will be heard, indicating that you absolutely must stop heating, as otherwise combustion will take place, and this overheating tends to damage the cap.
7. Before restarting heating:
8. Wait for a^3rd click (or 30 seconds if you didn't hear anything) to let it cool down.
9. You can then start heating again until your bowl is completely vaporized.
10. You can then repeat the procedure and heat until you hear a click, and so on until your bowl is fully vaporized (dark brown plants and no more steam).
11. To fill and empty your Sceptre's bowl, simply suck and blow.

⚠️ Be careful not to burn yourself, so remember to let the cap of your Sceptre cool before putting your fingers in it.

How do I clean the Sceptre vaporizer?

Cleaning this portable vaporizer is quick and easy. Here's our recommended procedure

1. Disassemble your Sceptre vaporizer completely;
2. Soak all parts in boiling water for 1 minute;
3. Take them out, wipe them dry and soak them in a ziplock bag containing 99.9% ISO alcohol for 2 minutes, then shake a little;
4. Take them out, rinse with clean water, then soak in boiling water containing a little cleaner such as Limpuro (or similar) for 5 minutes;
5. Rinse with clean water.

Now your Sceptre vaporizer is brand new, odorless and ready to follow you wherever you want to take it.